[Sat Mar 10 11:44:16 2012] Detection parameters:
  Position = (394.8, 441.0) = 7 8 9.32 -49 22 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 567.3 +/- 31.3
  Background counts = 69.3
  Rate = 0.005 +/- 0.0003

[Sat Mar 10 11:44:17 2012] Off-axis axis estimate = 12.47'
[Sat Mar 10 15:32:24 2012] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 15:32:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 15:32:24 2012] Initial guess for spatial extent in simple fitting = 12.66"
[Sat Mar 10 15:32:24 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.902
[Sat Mar 10 15:32:24 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.66"
[Sat Mar 10 16:51:06 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Mar 10 16:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_src3.csv
[Sat Mar 10 16:51:06 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Mar 10 16:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_src3.csv
[Sat Mar 10 16:51:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 16:51:06 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Mar 10 16:51:06 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Mar 10 16:51:06 2012] Fit fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Mar 10 18:22:46 2012] Warning, spatial fit 3 centroid is now closest to src. 8
[Sat Mar 10 18:22:46 2012] Source 5 is offset by 5.547704 and 6.184260 pixels which is larger than
2 X fitted extent = 1.411862 x 1.411862, not incorporating fit results
[Sat Mar 10 18:22:46 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 18:22:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 18:22:46 2012] Assessing source extent using major
[Sat Mar 10 18:22:46 2012] Source does appear to be extended
[Sat Mar 10 18:22:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 20:27:19 2012] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 20:27:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 20:27:19 2012] Initial guess for spatial extent in simple fitting = 12.66"
[Sat Mar 10 20:27:19 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.902
[Sat Mar 10 20:27:19 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.66"
[Sat Mar 10 21:23:21 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Mar 10 21:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_src3.csv
[Sat Mar 10 21:23:21 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Mar 10 21:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_src3.csv
[Sat Mar 10 21:23:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 21:23:22 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Mar 10 21:23:22 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Mar 10 21:23:22 2012] Fit fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Mar 10 22:15:19 2012] Warning, spatial fit 3 centroid is now closest to src. 8
[Sat Mar 10 22:15:19 2012] Source 5 is offset by -4.863158 and 6.184766 pixels which is larger than
2 X fitted extent = 1.411862 x 1.411862, not incorporating fit results
[Sat Mar 10 22:15:19 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 22:15:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 22:15:19 2012] Assessing source extent using major
[Sat Mar 10 22:15:19 2012] Source does appear to be extended
[Sat Mar 10 22:15:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 03:04:19 2012] XMMSAS src. selection expression = ellipse(34294.994263, 38316.686615, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 11 03:04:19 2012] Writing source region out to fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src5_src.reg
[Sun Mar 11 03:04:19 2012] Extracting stamp from image fullrun_mos1_xmm0511580101_pi300-10000_cl_sm2.00.img.gz, (357, 403) - (432, 478)
[Sun Mar 11 03:04:19 2012] XMMSAS bgd. selection expression = annulus(34294.994263, 38316.686615, 1087.500000, 2175.000000, X, Y) && !ellipse(35556.940308, 39187.090179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34823.735382, 36781.800903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36727.412628, 35417.588440, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 03:04:19 2012] Writing fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src5.gif
[Sun Mar 11 03:10:11 2012] Mean detx,y = (11442.71, -8987.31) 
[Sun Mar 11 03:10:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 03:10:26 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 03:10:26 2012] Setting source spectrum file to fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar 11 03:10:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Mar 11 03:37:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 11 03:37:19 2012] rmf not generated due to insufficient counts
[Sun Mar 11 04:51:14 2012] Updating aperture counts using extracted products
[Sun Mar 11 04:51:14 2012] Error reading totcts from fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar 11 04:51:16 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 04:51:16 2012] Using photon index=1.80, rate=0.0046, arf fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src5.arf
[Sun Mar 11 04:51:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 04:51:16 2012] Updating source flux to 1.2e-13
[Sun Mar 11 04:51:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting