[Sat Mar 10 11:44:16 2012] Detection parameters:
  Position = (322.0, 294.8) = 7 8 41.66 -49 33 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93309.0 +/- 357.5
  Background counts = 126.3
  Rate = 0.8 +/- 0.003

[Sat Mar 10 11:44:17 2012] Off-axis axis estimate = 1.73'
[Sat Mar 10 15:32:24 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 15:32:24 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Mar 10 15:32:24 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Sat Mar 10 15:32:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Mar 10 16:51:06 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 10 16:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_src1.csv
[Sat Mar 10 16:51:06 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 10 16:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_src1.csv
[Sat Mar 10 16:51:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 16:51:06 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 10 16:51:06 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 10 16:51:06 2012] Fit fullrun_mos1_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 10 18:22:46 2012] Spatial fit model total counts = 82794.500000, observed total counts = 82207.000000
[Sat Mar 10 18:22:46 2012] Offset between fit and detection position for source 3 = 0.202405 pixels
[Sat Mar 10 18:22:46 2012] 82620.900000 total counts/ 18630.500000 bgd. counts: snr = 468.816156
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.202405 pixels
  Position = (321.9, 294.6) = 7 8 41.71 -49 33 6.3
  Extent = 5.3 (5.3-5.3)", rotation angle = 0
  Source counts = 63990.4 +/- 287.4
  Background counts = 18630.5
  Rate = 0.5 +/- 0.002
[Sat Mar 10 18:22:46 2012] Spatial fit model total counts = 72452.000000, observed total counts = 75677.000000
[Sat Mar 10 18:22:46 2012] Offset between fit and detection position for source 3 = 0.044135 pixels
[Sat Mar 10 18:22:46 2012] Warning, changing simple spatial fit ID from 1 to 8
[Sat Mar 10 18:22:46 2012] 66220.980000 total counts/ 8463.480000 bgd. counts: snr = 627.818199
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.044135 pixels
  Position = (322.0, 294.6) = 7 8 41.70 -49 33 6.4
  Extent = 4.7 (4.7-4.7)", rotation angle = 0
  Source counts = 57757.5 +/- 257.3
  Background counts = 8463.5
  Rate = 0.5 +/- 0.002
[Sat Mar 10 18:22:46 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 18:22:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 18:22:46 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 18:22:46 2012] Source does appear to be extended
[Sat Mar 10 18:22:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 18:22:46 2012] Source is confused with source 25
[Sat Mar 10 20:27:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 20:27:19 2012] Initial guess for spatial extent in simple fitting = 4.70"
[Sat Mar 10 20:27:19 2012] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.202
[Sat Mar 10 20:27:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.70"
[Sat Mar 10 21:23:21 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 10 21:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_src1.csv
[Sat Mar 10 21:23:21 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 10 21:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_src1.csv
[Sat Mar 10 21:23:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 21:23:22 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 10 21:23:22 2012] fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 10 21:23:22 2012] Fit fullrun_mos1_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 10 22:15:19 2012] Spatial fit model total counts = 82839.500000, observed total counts = 82445.000000
[Sat Mar 10 22:15:19 2012] Offset between fit and detection position for source 3 = 0.041849 pixels
[Sat Mar 10 22:15:19 2012] 83015.800000 total counts/ 18734.300000 bgd. counts: snr = 469.642366
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.041849 pixels
  Position = (321.9, 294.6) = 7 8 41.71 -49 33 6.3
  Extent = 5.3 (5.3-5.3)", rotation angle = 0
  Source counts = 64281.5 +/- 288.1
  Background counts = 18734.3
  Rate = 0.5 +/- 0.002
[Sat Mar 10 22:15:19 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 22:15:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 22:15:19 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 22:15:19 2012] Source does appear to be extended
[Sat Mar 10 22:15:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 03:04:18 2012] Counts = 64281.500000, rescaling region sizes by 3.000000
[Sun Mar 11 03:04:18 2012] XMMSAS src. selection expression = ellipse(27960.096720, 25580.572200, 955.301427, 955.301427, 0.000000, X, Y)
[Sun Mar 11 03:04:18 2012] Writing source region out to fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src3_src.reg
[Sun Mar 11 03:04:18 2012] Extracting stamp from image fullrun_mos1_xmm0511580101_pi300-10000_cl_sm2.00.img.gz, (267, 240) - (377, 349)
[Sun Mar 11 03:04:18 2012] XMMSAS bgd. selection expression = annulus(27960.096720, 25580.572200, 4776.507137, 9553.014275, X, Y) && !ellipse(27114.839233, 25672.914062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27673.237030, 17485.155502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19655.457238, 29838.704408, 768.196153, 362.115558, 136.030708, X, Y) && !ellipse(30274.334717, 34754.887817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28537.459686, 25772.729889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34767.377075, 27113.328522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26532.163400, 35025.067800, 487.907214, 487.907214, 0.000000, X, Y) && !ellipse(37109.121000, 34886.612000, 421.141612, 421.141612, 0.000000, X, Y) && !ellipse(27833.433533, 24465.162476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34329.416718, 29726.174713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35493.904602, 24311.866394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36727.412628, 35417.588440, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 03:04:18 2012] Writing fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src3.gif
[Sun Mar 11 03:04:36 2012] Mean detx,y = (293.50, -188.85) 
[Sun Mar 11 03:04:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 03:07:16 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 03:07:16 2012] Setting source spectrum file to fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar 11 03:07:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Mar 11 04:51:14 2012] Updating aperture counts using extracted products
[Sun Mar 11 04:51:14 2012] Error reading totcts from fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar 11 04:51:16 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 04:51:16 2012] Using photon index=1.80, rate=0.527, arf fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src3.arf
[Sun Mar 11 04:51:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 04:51:16 2012] Updating source flux to 5e-12
[Sun Mar 11 04:51:22 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Sun Mar 11 04:54:43 2012] Reading fit data from xmm0511580101/analysis//spectral/fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src3_pl.csv
[Sun Mar 11 04:54:43 2012] Spectral fit parameter nH value = 7.72393e+20
[Sun Mar 11 04:54:43 2012] Spectral fit parameter PhoIndex value = 3.58961
[Sun Mar 11 04:54:43 2012] Failed to get F(0.3-8.0) from xmm0511580101/analysis//spectral/fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Mar 11 04:54:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 04:54:43 2012] Using Nh = 7.7e+20, photon index=3.59, rate=0.527, arf fullrun_mos1_xmm0511580101_pi300-10000_pass1_cl_src3.arf
[Sun Mar 11 04:54:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 04:54:43 2012] Updating source flux to 3.5e-12