[Thu Feb 16 09:39:32 2012] Detection parameters:
  Position = (414.8, 233.5) = 0 42 52.94 40 50 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.2 +/- 14.2
  Background counts = 24.0
  Rate = 0.004 +/- 0.0005

[Thu Feb 16 09:39:33 2012] Off-axis axis estimate = 9.66'
[Thu Feb 16 09:42:17 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:42:17 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Thu Feb 16 09:42:17 2012] source mask rpix=2.6, npix_max = 38, mask sum = 39, frac = 1.022
[Thu Feb 16 09:42:17 2012] Giving source the simple spatial ID 90 for pass 0, mean size = 11.26"
[Thu Feb 16 16:37:17 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src90.ximg exists
[Thu Feb 16 16:37:17 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src90_1.ximg exists
[Thu Feb 16 16:37:17 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src90 appears to have run properly
[Thu Feb 16 16:37:19 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Thu Feb 16 16:37:19 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Thu Feb 16 16:37:19 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src90 appears to have run properly
[Thu Feb 16 17:29:27 2012] Warning, spatial fit 90 centroid is now closest to src. 105
[Thu Feb 16 17:29:27 2012] Spatial fit model total counts = 344.874000, observed total counts = 348.000000
[Thu Feb 16 17:29:27 2012] Offset between fit and detection position for source 92 = 2.067418 pixels
[Thu Feb 16 17:29:27 2012] Warning, changing simple spatial fit ID from 90 to 93
[Thu Feb 16 17:29:27 2012] 320.714400 total counts/ 75.575400 bgd. counts: snr = 28.198252
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 2.067418 pixels
  Position = (414.3, 231.5) = 0 42 53.14 40 49 51.4
  Extent = 22.1 (22.1-44.3)", rotation angle = 0
  Source counts = 245.1 +/- 17.9
  Background counts = 75.6
  Rate = 0.01 +/- 0.001
[Thu Feb 16 17:29:27 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 17:29:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 17:29:27 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 17:29:27 2012] Source does appear to be extended
[Thu Feb 16 17:29:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 17:29:27 2012] Source is confused with source 86
[Thu Feb 16 17:29:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 17:29:49 2012] Initial guess for spatial extent in simple fitting = 22.15"
[Thu Feb 16 17:29:49 2012] source mask rpix=5.1, npix_max = 125, mask sum = 112, frac = 0.895
[Thu Feb 16 17:29:49 2012] Giving source the simple spatial ID 80 for pass 1, mean size = 22.15"
[Fri Feb 17 05:45:58 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src80.ximg exists
[Fri Feb 17 05:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src80.csv
[Fri Feb 17 05:45:58 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src80_1.ximg exists
[Fri Feb 17 05:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src80.csv
[Fri Feb 17 05:45:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 05:46:01 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Fri Feb 17 05:46:01 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Fri Feb 17 05:46:01 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src80 appears to have run properly
[Fri Feb 17 06:30:50 2012] Warning, spatial fit 80 centroid is now closest to src. 105
[Fri Feb 17 06:30:50 2012] Spatial fit model total counts = 345.490000, observed total counts = 348.000000
[Fri Feb 17 06:30:50 2012] Offset between fit and detection position for source 92 = 0.176186 pixels
[Fri Feb 17 06:30:50 2012] Warning, changing simple spatial fit ID from 80 to 83
[Fri Feb 17 06:30:50 2012] 322.563700 total counts/ 81.304700 bgd. counts: snr = 26.756278
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 0.176186 pixels
  Position = (414.5, 231.6) = 0 42 53.08 40 49 51.8
  Extent = 22.1 (22.1-44.3)", rotation angle = 0
  Source counts = 241.3 +/- 18.0
  Background counts = 81.3
  Rate = 0.01 +/- 0.001
[Fri Feb 17 06:30:50 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 06:30:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 06:30:50 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 06:30:50 2012] Source does appear to be extended
[Fri Feb 17 06:30:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 06:31:15 2012] XMMSAS src. selection expression = ellipse(36009.932000, 20102.458000, 1328.958038, 1328.958038, 0.000000, X, Y)
[Fri Feb 17 06:31:15 2012] Writing source region out to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src92_src.reg
[Fri Feb 17 06:31:15 2012] Extracting stamp from image fullrun_pn_xmm0511380601_pi300-10000_cl_sm2.00.img.gz, (338, 155) - (491, 308)
[Fri Feb 17 06:31:15 2012] XMMSAS bgd. selection expression = annulus(36009.932000, 20102.458000, 2214.930064, 4429.860127, X, Y) && !ellipse(29436.373200, 25586.599000, 2295.392066, 995.080029, 222.987000, X, Y) && !ellipse(31267.240000, 24323.092000, 1307.992038, 1307.992038, 0.000000, X, Y) && !ellipse(31550.248000, 23885.390000, 573.181616, 573.181616, 0.000000, X, Y) && !ellipse(30421.826000, 23172.318000, 1386.056040, 1386.056040, 0.000000, X, Y) && !ellipse(32254.828000, 23299.026000, 1077.872031, 1077.872031, 0.000000, X, Y) && !ellipse(32914.559570, 22892.015137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32685.648000, 22732.814000, 1564.320045, 1564.320045, 0.000000, X, Y) && !ellipse(31654.960000, 22478.370000, 1495.264043, 1495.264043, 0.000000, X, Y) && !ellipse(33532.443298, 22141.275070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33051.508636, 22219.707291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32085.964752, 22238.028320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38422.906372, 22493.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32726.121521, 21768.672241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34324.456400, 21594.141800, 695.143220, 695.143220, 0.000000, X, Y) && !ellipse(32836.684906, 21210.185501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35011.647000, 21196.621800, 608.720818, 608.720818, 0.000000, X, Y) && !ellipse(33510.692000, 20641.838000, 1702.616049, 600.667217, 317.339100, X, Y) && !ellipse(35160.897552, 20307.195435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34273.971741, 20226.848938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35556.297791, 20312.802856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35271.391907, 19882.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33948.281952, 19712.257797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34508.909973, 19561.377792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35731.747437, 19102.793167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32664.057556, 18578.772690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38076.435669, 18390.693069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36835.883850, 18651.513855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38425.826000, 18076.596000, 1828.808053, 1828.808053, 0.000000, X, Y) && !ellipse(37544.394348, 18567.366684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31581.957886, 18540.002625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32638.407318, 18222.365540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37503.148468, 17965.564468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38064.886292, 17968.935028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36740.361206, 17620.404022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36176.401123, 17451.577347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37364.287781, 17104.286240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36886.634735, 16933.804153, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 06:31:15 2012] Writing fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src92.gif
[Fri Feb 17 07:23:39 2012] Mean detx,y = (10325.81, -251.35) 
[Fri Feb 17 07:23:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 07:24:10 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 07:24:10 2012] Setting source spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Fri Feb 17 07:24:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Fri Feb 17 11:12:34 2012] Updating aperture counts using extracted products
[Fri Feb 17 11:12:34 2012] Error reading totcts from fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Fri Feb 17 11:12:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 11:12:40 2012] Using photon index=1.80, rate=0.0132, arf fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src92.arf
[Fri Feb 17 11:12:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 11:12:40 2012] Updating source flux to 5.1e-14
[Fri Feb 17 11:14:27 2012] Flag c found in src. 92 procflags, skipping spectral fitting