[Thu Feb 16 09:39:32 2012] Detection parameters:
  Position = (394.8, 248.9) = 0 43 0.59 40 51 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.0 +/- 13.9
  Background counts = 24.1
  Rate = 0.006 +/- 0.0008

[Thu Feb 16 09:39:33 2012] Off-axis axis estimate = 7.86'
[Thu Feb 16 09:42:17 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:42:17 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Thu Feb 16 09:42:17 2012] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.024
[Thu Feb 16 09:42:17 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 10.36"
[Thu Feb 16 16:37:17 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src83.ximg exists
[Thu Feb 16 16:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src83.csv
[Thu Feb 16 16:37:17 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src83_1.ximg exists
[Thu Feb 16 16:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src83.csv
[Thu Feb 16 16:37:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 16:37:19 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Thu Feb 16 16:37:19 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Thu Feb 16 16:37:19 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Thu Feb 16 17:29:27 2012] Spatial fit model total counts = 239.521000, observed total counts = 239.000000
[Thu Feb 16 17:29:27 2012] Offset between fit and detection position for source 85 = 0.267643 pixels
[Thu Feb 16 17:29:27 2012] 214.374700 total counts/ 167.261000 bgd. counts: snr = 3.642922
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 0.267643 pixels
  Position = (395.1, 248.8) = 0 43 0.49 40 51 6.6
  Extent = 8.7 (6.0-11.6)", rotation angle = 0
  Source counts = 47.1 +/- 14.6
  Background counts = 167.3
  Rate = 0.003 +/- 0.0008
[Thu Feb 16 17:29:27 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 17:29:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 17:29:27 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 17:29:27 2012] Source does appear to be extended
[Thu Feb 16 17:29:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 17:29:27 2012] Source is confused with source 90
[Thu Feb 16 17:29:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 17:29:49 2012] Initial guess for spatial extent in simple fitting = 8.69"
[Thu Feb 16 17:29:49 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.962
[Thu Feb 16 17:29:49 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 8.69"
[Fri Feb 17 05:45:58 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src73.ximg exists
[Fri Feb 17 05:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src73.csv
[Fri Feb 17 05:45:58 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src73_1.ximg exists
[Fri Feb 17 05:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src73.csv
[Fri Feb 17 05:45:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 05:46:01 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Fri Feb 17 05:46:01 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Fri Feb 17 05:46:01 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Fri Feb 17 06:30:50 2012] Warning, spatial fit 73 centroid is now closest to src. 89
[Fri Feb 17 06:30:50 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 06:30:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 06:30:50 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 06:30:50 2012] Source does appear to be extended
[Fri Feb 17 06:30:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 06:31:15 2012] XMMSAS src. selection expression = ellipse(34324.456400, 21594.141800, 521.357415, 521.357415, 0.000000, X, Y)
[Fri Feb 17 06:31:15 2012] Writing source region out to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src85_src.reg
[Fri Feb 17 06:31:15 2012] Extracting stamp from image fullrun_pn_xmm0511380601_pi300-10000_cl_sm2.00.img.gz, (365, 219) - (425, 279)
[Fri Feb 17 06:31:15 2012] XMMSAS bgd. selection expression = annulus(34324.456400, 21594.141800, 868.929025, 1737.858050, X, Y) && !ellipse(32254.828000, 23299.026000, 1077.872031, 1077.872031, 0.000000, X, Y) && !ellipse(32914.559570, 22892.015137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32685.648000, 22732.814000, 1564.320045, 1564.320045, 0.000000, X, Y) && !ellipse(31654.960000, 22478.370000, 1495.264043, 1495.264043, 0.000000, X, Y) && !ellipse(33532.443298, 22141.275070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33051.508636, 22219.707291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32085.964752, 22238.028320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32726.121521, 21768.672241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32836.684906, 21210.185501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35011.647000, 21196.621800, 608.720818, 608.720818, 0.000000, X, Y) && !ellipse(33510.692000, 20641.838000, 1702.616049, 600.667217, 317.339100, X, Y) && !ellipse(36009.932000, 20102.458000, 1771.944051, 1771.944051, 0.000000, X, Y) && !ellipse(35160.897552, 20307.195435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34273.971741, 20226.848938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35556.297791, 20312.802856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35271.391907, 19882.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33948.281952, 19712.257797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34508.909973, 19561.377792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35731.747437, 19102.793167, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 06:31:15 2012] Writing fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src85.gif
[Fri Feb 17 07:20:43 2012] Mean detx,y = (8142.20, -521.20) 
[Fri Feb 17 07:20:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 07:21:00 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 07:21:01 2012] Setting source spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Fri Feb 17 07:21:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Fri Feb 17 09:58:38 2012] Not generating rmf since there are only 47 counts
[Fri Feb 17 09:58:38 2012] rmf not generated due to insufficient counts
[Fri Feb 17 11:12:34 2012] Updating aperture counts using extracted products
[Fri Feb 17 11:12:34 2012] Error reading totcts from fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Fri Feb 17 11:12:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 11:12:40 2012] Using photon index=1.80, rate=0.00257, arf fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src85.arf
[Fri Feb 17 11:12:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 11:12:40 2012] Updating source flux to 1.1e-14
[Fri Feb 17 11:14:27 2012] Flag c found in src. 85 procflags, skipping spectral fitting
[Fri Feb 17 11:14:27 2012] Source 85 has fewer than 100.000000 counts, skipping spectral fitting