[Thu Feb 16 09:39:32 2012] Detection parameters:
  Position = (374.0, 260.0) = 0 43 8.56 40 51 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.8 +/- 14.9
  Background counts = 34.1
  Rate = 0.004 +/- 0.0007

[Thu Feb 16 09:39:33 2012] Off-axis axis estimate = 6.15'
[Thu Feb 16 09:42:17 2012] Using EEF radius (= 9.50 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:42:17 2012] Initial guess for spatial extent in simple fitting = 9.50"
[Thu Feb 16 09:42:17 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.249
[Thu Feb 16 09:42:17 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 9.50"
[Thu Feb 16 16:37:17 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src75.ximg exists
[Thu Feb 16 16:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src75.csv
[Thu Feb 16 16:37:17 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src75_1.ximg exists
[Thu Feb 16 16:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src75.csv
[Thu Feb 16 16:37:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 16:37:19 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Thu Feb 16 16:37:19 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Thu Feb 16 16:37:19 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Thu Feb 16 17:29:27 2012] Warning, spatial fit 75 centroid is now closest to src. 73
[Thu Feb 16 17:29:27 2012] Spatial fit model total counts = 339.688000, observed total counts = 339.000000
[Thu Feb 16 17:29:27 2012] Offset between fit and detection position for source 77 = 2.980516 pixels
[Thu Feb 16 17:29:27 2012] Warning, changing simple spatial fit ID from 75 to 79
[Thu Feb 16 17:29:27 2012] 320.975000 total counts/ 167.746000 bgd. counts: snr = 11.830821
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 2.980516 pixels
  Position = (376.3, 261.9) = 0 43 7.68 40 52 3.9
  Extent = 19.6 (19.5-39.1)", rotation angle = 0
  Source counts = 153.2 +/- 17.9
  Background counts = 167.7
  Rate = 0.008 +/- 0.001
[Thu Feb 16 17:29:27 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 17:29:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 17:29:27 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 17:29:27 2012] Source does appear to be extended
[Thu Feb 16 17:29:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 17:29:27 2012] Source is confused with source 75
[Thu Feb 16 17:29:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 17:29:49 2012] Initial guess for spatial extent in simple fitting = 19.55"
[Thu Feb 16 17:29:49 2012] source mask rpix=4.5, npix_max = 99, mask sum = 99, frac = 0.992
[Thu Feb 16 17:29:49 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 19.55"
[Fri Feb 17 05:45:58 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src65.ximg exists
[Fri Feb 17 05:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src65.csv
[Fri Feb 17 05:45:58 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src65_1.ximg exists
[Fri Feb 17 05:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src65.csv
[Fri Feb 17 05:45:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 05:46:01 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Fri Feb 17 05:46:01 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Fri Feb 17 05:46:01 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Fri Feb 17 06:30:50 2012] Warning, spatial fit 65 centroid is now closest to src. 75
[Fri Feb 17 06:30:50 2012] Spatial fit model total counts = 341.409000, observed total counts = 339.000000
[Fri Feb 17 06:30:50 2012] Offset between fit and detection position for source 77 = 0.096978 pixels
[Fri Feb 17 06:30:50 2012] Warning, changing simple spatial fit ID from 65 to 69
[Fri Feb 17 06:30:50 2012] 322.246000 total counts/ 158.159000 bgd. counts: snr = 13.047497
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 0.096978 pixels
  Position = (376.3, 261.9) = 0 43 7.71 40 52 3.6
  Extent = 19.6 (19.5-39.1)", rotation angle = 0
  Source counts = 164.1 +/- 18.0
  Background counts = 158.2
  Rate = 0.009 +/- 0.001
[Fri Feb 17 06:30:50 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 06:30:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 06:30:50 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 06:30:50 2012] Source does appear to be extended
[Fri Feb 17 06:30:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 06:31:15 2012] XMMSAS src. selection expression = ellipse(32685.648000, 22732.814000, 1173.240034, 1173.240034, 0.000000, X, Y)
[Fri Feb 17 06:31:15 2012] Writing source region out to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src77_src.reg
[Fri Feb 17 06:31:15 2012] Extracting stamp from image fullrun_pn_xmm0511380601_pi300-10000_cl_sm2.00.img.gz, (309, 194) - (444, 329)
[Fri Feb 17 06:31:15 2012] XMMSAS bgd. selection expression = annulus(32685.648000, 22732.814000, 1955.400056, 3910.800113, X, Y) && !ellipse(28951.001740, 26339.883972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29436.373200, 25586.599000, 2295.392066, 995.080029, 222.987000, X, Y) && !ellipse(28456.802551, 26150.999878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27953.682465, 26051.954010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29402.358000, 25571.348000, 1059.200030, 1059.200030, 0.000000, X, Y) && !ellipse(30261.017090, 25158.637543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29788.624000, 25322.894000, 1268.352036, 1268.352036, 0.000000, X, Y) && !ellipse(31267.240000, 24323.092000, 1307.992038, 1307.992038, 0.000000, X, Y) && !ellipse(31550.248000, 23885.390000, 573.181616, 573.181616, 0.000000, X, Y) && !ellipse(30421.826000, 23172.318000, 1386.056040, 1386.056040, 0.000000, X, Y) && !ellipse(32254.828000, 23299.026000, 1077.872031, 1077.872031, 0.000000, X, Y) && !ellipse(32914.559570, 22892.015137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31654.960000, 22478.370000, 1495.264043, 1495.264043, 0.000000, X, Y) && !ellipse(33532.443298, 22141.275070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33051.508636, 22219.707291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32085.964752, 22238.028320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32726.121521, 21768.672241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34324.456400, 21594.141800, 695.143220, 695.143220, 0.000000, X, Y) && !ellipse(32836.684906, 21210.185501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35011.647000, 21196.621800, 608.720818, 608.720818, 0.000000, X, Y) && !ellipse(33510.692000, 20641.838000, 1702.616049, 600.667217, 317.339100, X, Y) && !ellipse(36009.932000, 20102.458000, 1771.944051, 1771.944051, 0.000000, X, Y) && !ellipse(35160.897552, 20307.195435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34273.971741, 20226.848938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35556.297791, 20312.802856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35271.391907, 19882.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33948.281952, 19712.257797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34508.909973, 19561.377792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35731.747437, 19102.793167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28010.460266, 18691.113617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32664.057556, 18578.772690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36835.883850, 18651.513855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29972.224243, 18750.809296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31581.957886, 18540.002625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32638.407318, 18222.365540, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 06:31:15 2012] Writing fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src77.gif
[Fri Feb 17 07:16:34 2012] Mean detx,y = (6123.29, -231.18) 
[Fri Feb 17 07:16:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 07:17:07 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 07:17:07 2012] Setting source spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Fri Feb 17 07:17:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Fri Feb 17 11:12:34 2012] Updating aperture counts using extracted products
[Fri Feb 17 11:12:34 2012] Error reading totcts from fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Fri Feb 17 11:12:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 11:12:39 2012] Using photon index=1.80, rate=0.00896, arf fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src77.arf
[Fri Feb 17 11:12:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 11:12:39 2012] Updating source flux to 2.6e-14
[Fri Feb 17 11:14:27 2012] Flag c found in src. 77 procflags, skipping spectral fitting