[Thu Feb 16 09:39:32 2012] Detection parameters:
  Position = (372.7, 268.8) = 0 43 9.06 40 52 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.2 +/- 14.2
  Background counts = 31.5
  Rate = 0.005 +/- 0.0007

[Thu Feb 16 09:39:33 2012] Off-axis axis estimate = 5.80'
[Thu Feb 16 09:42:17 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:42:17 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Thu Feb 16 09:42:17 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.894
[Thu Feb 16 09:42:17 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 9.33"
[Thu Feb 16 16:37:17 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src73.ximg exists
[Thu Feb 16 16:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src73.csv
[Thu Feb 16 16:37:17 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src73_1.ximg exists
[Thu Feb 16 16:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src73.csv
[Thu Feb 16 16:37:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 16:37:19 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Thu Feb 16 16:37:19 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Thu Feb 16 16:37:19 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Thu Feb 16 17:29:27 2012] Spatial fit model total counts = 306.027000, observed total counts = 303.000000
[Thu Feb 16 17:29:27 2012] Offset between fit and detection position for source 75 = 3.114153 pixels
[Thu Feb 16 17:29:27 2012] Warning, changing simple spatial fit ID from 73 to 71
[Thu Feb 16 17:29:27 2012] 280.687800 total counts/ 237.856000 bgd. counts: snr = 2.777214
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 3.114153 pixels
  Position = (369.7, 269.5) = 0 43 10.23 40 52 37.0
  Extent = 9.0 (5.4-16.6)", rotation angle = 0
  Source counts = 42.8 +/- 16.8
  Background counts = 237.9
  Rate = 0.002 +/- 0.0009
[Thu Feb 16 17:29:27 2012] Spatial fit model total counts = 261.320000, observed total counts = 257.000000
[Thu Feb 16 17:29:27 2012] Offset between fit and detection position for source 75 = 1.548299 pixels
[Thu Feb 16 17:29:27 2012] Warning, changing simple spatial fit ID from 71 to 73
[Thu Feb 16 17:29:27 2012] 229.120700 total counts/ 187.732000 bgd. counts: snr = 3.020735
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 1.548299 pixels
  Position = (371.1, 270.1) = 0 43 9.68 40 52 39.5
  Extent = 9.4 (5.2-13.6)", rotation angle = 0
  Source counts = 41.4 +/- 15.1
  Background counts = 187.7
  Rate = 0.002 +/- 0.0008
[Thu Feb 16 17:29:27 2012] Source 75 is offset by 0.265216 and -1.347566 pixels which is larger than
2 X fitted extent = 1.104060 x 1.104060, not incorporating fit results
[Thu Feb 16 17:29:27 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 17:29:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 17:29:27 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 17:29:27 2012] Source does appear to be extended
[Thu Feb 16 17:29:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 17:29:27 2012] Source is confused with source 77
[Thu Feb 16 17:29:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 17:29:49 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Thu Feb 16 17:29:49 2012] source mask rpix=2.2, npix_max = 28, mask sum = 32, frac = 1.128
[Thu Feb 16 17:29:49 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 9.41"
[Fri Feb 17 05:45:58 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src63.ximg exists
[Fri Feb 17 05:45:58 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src63_1.ximg exists
[Fri Feb 17 05:45:58 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src63 appears to have run properly
[Fri Feb 17 05:46:01 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Fri Feb 17 05:46:01 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Fri Feb 17 05:46:01 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Fri Feb 17 06:30:50 2012] Warning, spatial fit 63 centroid is now closest to src. 73
[Fri Feb 17 06:30:50 2012] Spatial fit model total counts = 832.666000, observed total counts = 831.000000
[Fri Feb 17 06:30:50 2012] Offset between fit and detection position for source 75 = 1.747446 pixels
[Fri Feb 17 06:30:50 2012] Warning, changing simple spatial fit ID from 63 to 65
[Fri Feb 17 06:30:50 2012] 760.707700 total counts/ 686.342000 bgd. counts: snr = 2.838588
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 1.747446 pixels
  Position = (371.3, 268.4) = 0 43 9.60 40 52 32.0
  Extent = 13.5 (9.2-23.5)", rotation angle = 0
  Source counts = 74.4 +/- 27.6
  Background counts = 686.3
  Rate = 0.004 +/- 0.002
[Fri Feb 17 06:30:50 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 06:30:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 06:30:50 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 06:30:50 2012] Source does appear to be extended
[Fri Feb 17 06:30:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 06:31:15 2012] XMMSAS src. selection expression = ellipse(32254.828000, 23299.026000, 808.404023, 808.404023, 0.000000, X, Y)
[Fri Feb 17 06:31:15 2012] Writing source region out to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src75_src.reg
[Fri Feb 17 06:31:15 2012] Extracting stamp from image fullrun_pn_xmm0511380601_pi300-10000_cl_sm2.00.img.gz, (325, 222) - (418, 315)
[Fri Feb 17 06:31:15 2012] XMMSAS bgd. selection expression = annulus(32254.828000, 23299.026000, 1347.340039, 2694.680078, X, Y) && !ellipse(28951.001740, 26339.883972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29436.373200, 25586.599000, 2295.392066, 995.080029, 222.987000, X, Y) && !ellipse(29402.358000, 25571.348000, 1059.200030, 1059.200030, 0.000000, X, Y) && !ellipse(30261.017090, 25158.637543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29788.624000, 25322.894000, 1268.352036, 1268.352036, 0.000000, X, Y) && !ellipse(31267.240000, 24323.092000, 1307.992038, 1307.992038, 0.000000, X, Y) && !ellipse(31550.248000, 23885.390000, 573.181616, 573.181616, 0.000000, X, Y) && !ellipse(30421.826000, 23172.318000, 1386.056040, 1386.056040, 0.000000, X, Y) && !ellipse(32914.559570, 22892.015137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32685.648000, 22732.814000, 1564.320045, 1564.320045, 0.000000, X, Y) && !ellipse(31654.960000, 22478.370000, 1495.264043, 1495.264043, 0.000000, X, Y) && !ellipse(33532.443298, 22141.275070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33051.508636, 22219.707291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32085.964752, 22238.028320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32726.121521, 21768.672241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34324.456400, 21594.141800, 695.143220, 695.143220, 0.000000, X, Y) && !ellipse(32836.684906, 21210.185501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35011.647000, 21196.621800, 608.720818, 608.720818, 0.000000, X, Y) && !ellipse(33510.692000, 20641.838000, 1702.616049, 600.667217, 317.339100, X, Y) && !ellipse(36009.932000, 20102.458000, 1771.944051, 1771.944051, 0.000000, X, Y) && !ellipse(35160.897552, 20307.195435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34273.971741, 20226.848938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35556.297791, 20312.802856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35271.391907, 19882.342957, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 06:31:15 2012] Writing fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src75.gif
[Fri Feb 17 07:15:29 2012] Mean detx,y = (5551.08, -469.70) 
[Fri Feb 17 07:15:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 07:15:54 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 07:15:54 2012] Setting source spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Fri Feb 17 07:15:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Fri Feb 17 09:51:34 2012] Not generating rmf since there are only 74 counts
[Fri Feb 17 09:51:34 2012] rmf not generated due to insufficient counts
[Fri Feb 17 11:12:34 2012] Updating aperture counts using extracted products
[Fri Feb 17 11:12:34 2012] Error reading totcts from fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Fri Feb 17 11:12:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 11:12:39 2012] Using photon index=1.80, rate=0.00406, arf fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src75.arf
[Fri Feb 17 11:12:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 11:12:39 2012] Updating source flux to 1.3e-14
[Fri Feb 17 11:14:27 2012] Flag b found in src. 75 procflags, skipping spectral fitting
[Fri Feb 17 11:14:27 2012] Flag c found in src. 75 procflags, skipping spectral fitting
[Fri Feb 17 11:14:27 2012] Source 75 has fewer than 100.000000 counts, skipping spectral fitting