[Thu Feb 16 09:39:32 2012] Detection parameters:
  Position = (354.2, 272.1) = 0 43 16.18 40 52 46.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.1 +/- 14.3
  Background counts = 64.3
  Rate = 0.003 +/- 0.0007

[Thu Feb 16 09:39:33 2012] Off-axis axis estimate = 4.47'
[Thu Feb 16 09:42:17 2012] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:42:17 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Thu Feb 16 09:42:17 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007
[Thu Feb 16 09:42:17 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 8.66"
[Thu Feb 16 16:37:17 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src72.ximg exists
[Thu Feb 16 16:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src72.csv
[Thu Feb 16 16:37:17 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src72_1.ximg exists
[Thu Feb 16 16:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src72.csv
[Thu Feb 16 16:37:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 16:37:19 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Thu Feb 16 16:37:19 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Thu Feb 16 16:37:19 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Thu Feb 16 17:29:27 2012] Spatial fit model total counts = 346.906000, observed total counts = 347.000000
[Thu Feb 16 17:29:27 2012] Offset between fit and detection position for source 74 = 6.487387 pixels
[Thu Feb 16 17:29:27 2012] 364.974000 total counts/ 231.016000 bgd. counts: snr = 8.813484
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 6.487387 pixels
  Position = (350.2, 266.9) = 0 43 17.68 40 52 25.7
  Extent = 17.3 (17.3-34.7)", rotation angle = 0
  Source counts = 134.0 +/- 19.1
  Background counts = 231.0
  Rate = 0.007 +/- 0.001
[Thu Feb 16 17:29:27 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 17:29:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 17:29:27 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 17:29:27 2012] Source does appear to be extended
[Thu Feb 16 17:29:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 17:29:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 17:29:49 2012] Initial guess for spatial extent in simple fitting = 17.33"
[Thu Feb 16 17:29:49 2012] source mask rpix=4.0, npix_max = 80, mask sum = 80, frac = 0.995
[Thu Feb 16 17:29:49 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 17.33"
[Fri Feb 17 05:45:58 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src62.ximg exists
[Fri Feb 17 05:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src62.csv
[Fri Feb 17 05:45:58 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src62_1.ximg exists
[Fri Feb 17 05:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src62.csv
[Fri Feb 17 05:45:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 05:46:01 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Fri Feb 17 05:46:01 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Fri Feb 17 05:46:01 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Fri Feb 17 06:30:50 2012] Warning, spatial fit 62 centroid is now closest to src. 82
[Fri Feb 17 06:30:50 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 06:30:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 06:30:50 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 06:30:50 2012] Source does appear to be extended
[Fri Feb 17 06:30:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 06:31:14 2012] XMMSAS src. selection expression = ellipse(30421.826000, 23172.318000, 1039.542030, 1039.542030, 0.000000, X, Y)
[Fri Feb 17 06:31:14 2012] Writing source region out to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src74_src.reg
[Fri Feb 17 06:31:14 2012] Extracting stamp from image fullrun_pn_xmm0511380601_pi300-10000_cl_sm2.00.img.gz, (290, 207) - (410, 327)
[Fri Feb 17 06:31:15 2012] XMMSAS bgd. selection expression = annulus(30421.826000, 23172.318000, 1732.570050, 3465.140100, X, Y) && !ellipse(27127.826000, 27496.828000, 1167.896034, 1167.896034, 0.000000, X, Y) && !ellipse(26768.468000, 27772.468000, 1346.984039, 1346.984039, 0.000000, X, Y) && !ellipse(27793.783325, 26662.406311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27354.746000, 27040.478000, 1163.328033, 1163.328033, 0.000000, X, Y) && !ellipse(28951.001740, 26339.883972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29436.373200, 25586.599000, 2295.392066, 995.080029, 222.987000, X, Y) && !ellipse(28456.802551, 26150.999878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27953.682465, 26051.954010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29402.358000, 25571.348000, 1059.200030, 1059.200030, 0.000000, X, Y) && !ellipse(30261.017090, 25158.637543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29788.624000, 25322.894000, 1268.352036, 1268.352036, 0.000000, X, Y) && !ellipse(31267.240000, 24323.092000, 1307.992038, 1307.992038, 0.000000, X, Y) && !ellipse(31550.248000, 23885.390000, 573.181616, 573.181616, 0.000000, X, Y) && !ellipse(32254.828000, 23299.026000, 1077.872031, 1077.872031, 0.000000, X, Y) && !ellipse(32914.559570, 22892.015137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32685.648000, 22732.814000, 1564.320045, 1564.320045, 0.000000, X, Y) && !ellipse(31654.960000, 22478.370000, 1495.264043, 1495.264043, 0.000000, X, Y) && !ellipse(33532.443298, 22141.275070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33051.508636, 22219.707291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32085.964752, 22238.028320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32726.121521, 21768.672241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34324.456400, 21594.141800, 695.143220, 695.143220, 0.000000, X, Y) && !ellipse(32836.684906, 21210.185501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33510.692000, 20641.838000, 1702.616049, 600.667217, 317.339100, X, Y) && !ellipse(34273.971741, 20226.848938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33948.281952, 19712.257797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34508.909973, 19561.377792, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 06:31:15 2012] Writing fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src74.gif
[Fri Feb 17 07:14:41 2012] Mean detx,y = (4244.06, 670.02) 
[Fri Feb 17 07:14:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 07:15:19 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 07:15:19 2012] Setting source spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Fri Feb 17 07:15:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Fri Feb 17 11:12:34 2012] Updating aperture counts using extracted products
[Fri Feb 17 11:12:34 2012] Error reading totcts from fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Fri Feb 17 11:12:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 11:12:39 2012] Using photon index=1.80, rate=0.00731, arf fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src74.arf
[Fri Feb 17 11:12:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 11:12:39 2012] Updating source flux to 2e-14