[Thu Feb 16 09:39:31 2012] Detection parameters:
  Position = (299.2, 348.9) = 0 43 37.24 40 58 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.9 +/- 15.6
  Background counts = 43.1
  Rate = 0.004 +/- 0.0008

[Thu Feb 16 09:39:33 2012] Off-axis axis estimate = 3.66'
[Thu Feb 16 09:42:17 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:42:17 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Thu Feb 16 09:42:17 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.869
[Thu Feb 16 09:42:17 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 8.26"
[Thu Feb 16 16:37:16 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src44.ximg exists
[Thu Feb 16 16:37:16 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src44_1.ximg exists
[Thu Feb 16 16:37:16 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src44 appears to have run properly
[Thu Feb 16 16:37:18 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Thu Feb 16 16:37:18 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Thu Feb 16 16:37:18 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Thu Feb 16 17:29:26 2012] Source 46 is offset by -4.053626 and -1.612581 pixels which is larger than
2 X fitted extent = 2.023205 x 2.023205, not incorporating fit results
[Thu Feb 16 17:29:26 2012] Spatial fit model total counts = 371.591000, observed total counts = 370.000000
[Thu Feb 16 17:29:26 2012] Offset between fit and detection position for source 46 = 6.140331 pixels
[Thu Feb 16 17:29:26 2012] 374.676200 total counts/ 313.460000 bgd. counts: snr = 3.457604
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 6.140331 pixels
  Position = (303.8, 344.8) = 0 43 35.50 40 58 4.6
  Extent = 16.0 (14.8-16.5)", rotation angle = 0
  Source counts = 61.2 +/- 19.4
  Background counts = 313.5
  Rate = 0.003 +/- 0.001
[Thu Feb 16 17:29:26 2012] Source 46 is offset by -1.362685 and -0.860959 pixels which is larger than
2 X fitted extent = 0.935761 x 0.935761, not incorporating fit results
[Thu Feb 16 17:29:27 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 17:29:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 17:29:27 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 17:29:27 2012] Source does appear to be extended
[Thu Feb 16 17:29:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 17:29:27 2012] Source is confused with source 48
[Thu Feb 16 17:29:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 17:29:49 2012] Initial guess for spatial extent in simple fitting = 15.96"
[Thu Feb 16 17:29:49 2012] source mask rpix=3.7, npix_max = 69, mask sum = 49, frac = 0.705
[Thu Feb 16 17:29:49 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 15.96"
[Fri Feb 17 05:45:57 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src39.ximg exists
[Fri Feb 17 05:45:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src39.csv
[Fri Feb 17 05:45:57 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src39_1.ximg exists
[Fri Feb 17 05:45:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src39.csv
[Fri Feb 17 05:45:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 05:46:00 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Fri Feb 17 05:46:00 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Fri Feb 17 05:46:00 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Fri Feb 17 06:30:50 2012] Warning, spatial fit 39 centroid is now closest to src. 51
[Fri Feb 17 06:30:50 2012] Spatial fit model total counts = 376.393000, observed total counts = 380.000000
[Fri Feb 17 06:30:50 2012] Offset between fit and detection position for source 46 = 4.130020 pixels
[Fri Feb 17 06:30:50 2012] Warning, changing simple spatial fit ID from 39 to 41
[Fri Feb 17 06:30:50 2012] 364.136000 total counts/ 137.191000 bgd. counts: snr = 19.375718
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 4.130020 pixels
  Position = (299.7, 344.2) = 0 43 37.07 40 58 2.2
  Extent = 23.4 (23.2-23.5)", rotation angle = 0
  Source counts = 226.9 +/- 19.1
  Background counts = 137.2
  Rate = 0.01 +/- 0.001
[Fri Feb 17 06:30:50 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 06:30:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 06:30:50 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 06:30:50 2012] Source does appear to be extended
[Fri Feb 17 06:30:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 06:31:14 2012] XMMSAS src. selection expression = ellipse(26023.186000, 29900.154000, 1406.166040, 1406.166040, 0.000000, X, Y)
[Fri Feb 17 06:31:14 2012] Writing source region out to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src46_src.reg
[Fri Feb 17 06:31:14 2012] Extracting stamp from image fullrun_pn_xmm0511380601_pi300-10000_cl_sm2.00.img.gz, (219, 263) - (380, 425)
[Fri Feb 17 06:31:14 2012] XMMSAS bgd. selection expression = annulus(26023.186000, 29900.154000, 2343.610067, 4687.220135, X, Y) && !ellipse(31140.214000, 36346.612000, 1846.120053, 1846.120053, 0.000000, X, Y) && !ellipse(30829.342041, 35369.261597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30264.538000, 34985.386000, 1738.872050, 1738.872050, 0.000000, X, Y) && !ellipse(29785.242000, 34557.300000, 2478.864071, 2478.864071, 0.000000, X, Y) && !ellipse(28308.227112, 34027.770874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29005.690000, 34176.870000, 2738.528079, 2738.528079, 0.000000, X, Y) && !ellipse(27907.832000, 33767.271800, 1546.704045, 1546.704045, 0.000000, X, Y) && !ellipse(29146.596000, 33378.102000, 1605.272046, 1605.272046, 0.000000, X, Y) && !ellipse(27920.513184, 32929.587036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28817.586000, 32832.914000, 1084.720031, 1084.720031, 0.000000, X, Y) && !ellipse(28425.223633, 32748.450317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26774.464478, 32481.986267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27416.198334, 31880.367249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.770813, 31880.322113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25658.619200, 31481.523600, 946.880027, 946.880027, 0.000000, X, Y) && !ellipse(26809.915000, 31238.265000, 1383.408040, 1383.408040, 0.000000, X, Y) && !ellipse(25938.478058, 30838.063812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26969.970215, 30759.713898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26470.608000, 30334.180000, 1054.592030, 1054.592030, 0.000000, X, Y) && !ellipse(25708.230000, 28652.224000, 1193.384034, 1193.384034, 0.000000, X, Y) && !ellipse(24593.456400, 27987.916000, 622.558418, 622.558418, 0.000000, X, Y) && !ellipse(27127.826000, 27496.828000, 1167.896034, 1167.896034, 0.000000, X, Y) && !ellipse(26768.468000, 27772.468000, 1346.984039, 1346.984039, 0.000000, X, Y) && !ellipse(27793.783325, 26662.406311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27354.746000, 27040.478000, 1163.328033, 1163.328033, 0.000000, X, Y) && !ellipse(28951.001740, 26339.883972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29436.373200, 25586.599000, 2295.392066, 995.080029, 222.987000, X, Y) && !ellipse(28456.802551, 26150.999878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27953.682465, 26051.954010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25256.504000, 25735.694000, 1067.992031, 1067.992031, 0.000000, X, Y) && !ellipse(29402.358000, 25571.348000, 1059.200030, 1059.200030, 0.000000, X, Y) && !ellipse(25772.594482, 25341.691193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30261.017090, 25158.637543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29788.624000, 25322.894000, 1268.352036, 1268.352036, 0.000000, X, Y) && !ellipse(31267.240000, 24323.092000, 1307.992038, 1307.992038, 0.000000, X, Y)
[Fri Feb 17 06:31:14 2012] Writing fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src46.gif
[Fri Feb 17 06:59:57 2012] Mean detx,y = (-3727.79, -1700.49) 
[Fri Feb 17 06:59:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 07:00:38 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 07:00:38 2012] Setting source spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri Feb 17 07:00:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Fri Feb 17 11:12:32 2012] Updating aperture counts using extracted products
[Fri Feb 17 11:12:32 2012] Error reading totcts from fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri Feb 17 11:12:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 11:12:38 2012] Using photon index=1.80, rate=0.0124, arf fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src46.arf
[Fri Feb 17 11:12:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 11:12:38 2012] Updating source flux to 3.7e-14
[Fri Feb 17 11:14:27 2012] Flag b found in src. 46 procflags, skipping spectral fitting
[Fri Feb 17 11:14:27 2012] Flag c found in src. 46 procflags, skipping spectral fitting