[Thu Feb 16 09:39:31 2012] Detection parameters:
  Position = (364.5, 423.0) = 0 43 12.15 41 3 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.0 +/- 14.4
  Background counts = 39.5
  Rate = 0.002 +/- 0.0005

[Thu Feb 16 09:39:33 2012] Off-axis axis estimate = 10.22'
[Thu Feb 16 09:42:17 2012] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:42:17 2012] Initial guess for spatial extent in simple fitting = 11.54"
[Thu Feb 16 09:42:17 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.057
[Thu Feb 16 09:42:17 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 11.54"
[Thu Feb 16 16:37:15 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src14.ximg exists
[Thu Feb 16 16:37:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src14.csv
[Thu Feb 16 16:37:15 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Feb 16 16:37:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src14.csv
[Thu Feb 16 16:37:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 16:37:18 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Feb 16 16:37:18 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Feb 16 16:37:18 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Thu Feb 16 17:29:26 2012] Warning, spatial fit 14 centroid is now closest to src. 17
[Thu Feb 16 17:29:26 2012] Source 14 is offset by 2.821184 and 3.411807 pixels which is larger than
2 X fitted extent = 1.304156 x 1.304156, not incorporating fit results
[Thu Feb 16 17:29:27 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 17:29:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 17:29:27 2012] Assessing source extent using major
[Thu Feb 16 17:29:27 2012] Source does appear to be extended
[Thu Feb 16 17:29:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 17:29:27 2012] Source is confused with source 12
[Thu Feb 16 17:29:27 2012] Source is confused with source 13
[Thu Feb 16 17:29:27 2012] Source is confused with source 17
[Thu Feb 16 17:29:49 2012] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 17:29:49 2012] Initial guess for spatial extent in simple fitting = 11.54"
[Thu Feb 16 17:29:49 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.057
[Thu Feb 16 17:29:49 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 11.54"
[Fri Feb 17 05:45:57 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src12.ximg exists
[Fri Feb 17 05:45:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src12.csv
[Fri Feb 17 05:45:57 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Feb 17 05:45:57 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src12.csv
[Fri Feb 17 05:45:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 05:45:59 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Feb 17 05:45:59 2012] fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Feb 17 05:45:59 2012] Fit fullrun_pn_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Feb 17 06:30:50 2012] Warning, spatial fit 12 centroid is now closest to src. 17
[Fri Feb 17 06:30:50 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 30.259415 pixels away
[Fri Feb 17 06:30:50 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 06:30:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 06:30:50 2012] Assessing source extent using major
[Fri Feb 17 06:30:50 2012] Source does appear to be extended
[Fri Feb 17 06:30:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 06:31:12 2012] XMMSAS src. selection expression = ellipse(31660.637024, 36749.643188, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 17 06:31:12 2012] Writing source region out to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src14_src.reg
[Fri Feb 17 06:31:12 2012] Extracting stamp from image fullrun_pn_xmm0511380601_pi300-10000_cl_sm2.00.img.gz, (327, 385) - (402, 460)
[Fri Feb 17 06:31:12 2012] XMMSAS bgd. selection expression = annulus(31660.637024, 36749.643188, 1087.500000, 2175.000000, X, Y) && !ellipse(34643.034000, 39839.416000, 2072.048060, 2072.048060, 0.000000, X, Y) && !ellipse(33759.906000, 39011.016000, 1991.528057, 1991.528057, 0.000000, X, Y) && !ellipse(32349.425964, 38485.342041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32706.438000, 37695.146000, 1991.528057, 1991.528057, 0.000000, X, Y) && !ellipse(32276.988000, 37095.908000, 1933.392056, 1933.392056, 0.000000, X, Y) && !ellipse(30694.461200, 36813.459400, 397.974411, 397.974411, 0.000000, X, Y) && !ellipse(31140.214000, 36346.612000, 1846.120053, 1846.120053, 0.000000, X, Y) && !ellipse(30829.342041, 35369.261597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30264.538000, 34985.386000, 1738.872050, 1738.872050, 0.000000, X, Y) && !ellipse(29785.242000, 34557.300000, 2478.864071, 2478.864071, 0.000000, X, Y) && !ellipse(29005.690000, 34176.870000, 2738.528079, 2738.528079, 0.000000, X, Y) && !ellipse(29146.596000, 33378.102000, 1605.272046, 1605.272046, 0.000000, X, Y)
[Fri Feb 17 06:31:12 2012] Writing fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src14.gif
[Fri Feb 17 06:42:56 2012] Mean detx,y = (-3686.74, -10481.19) 
[Fri Feb 17 06:42:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 06:43:14 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 06:43:14 2012] Setting source spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Feb 17 06:43:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Feb 17 07:58:46 2012] Not generating rmf since there are only 69 counts
[Fri Feb 17 07:58:46 2012] rmf not generated due to insufficient counts
[Fri Feb 17 11:12:31 2012] Updating aperture counts using extracted products
[Fri Feb 17 11:12:31 2012] Error reading totcts from fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Feb 17 11:12:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 11:12:36 2012] Using photon index=1.80, rate=0.00246, arf fullrun_pn_xmm0511380601_pi300-10000_pass1_cl_src14.arf
[Fri Feb 17 11:12:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 11:12:36 2012] Updating source flux to 1.2e-14
[Fri Feb 17 11:14:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting