[Thu Feb 16 09:39:54 2012] Detection parameters:
  Position = (442.2, 259.1) = 0 42 42.42 40 51 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2101.6 +/- 55.6
  Background counts = 36.2
  Rate = 0.1 +/- 0.003

[Thu Feb 16 09:39:54 2012] Off-axis axis estimate = 10.81'
[Thu Feb 16 16:37:20 2012] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 16:37:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 16:37:20 2012] Initial guess for spatial extent in simple fitting = 11.83"
[Thu Feb 16 16:37:20 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.868
[Thu Feb 16 16:37:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.83"
[Thu Feb 16 16:59:42 2012] fullrun_mos1_xmm0511380601_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 16 16:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511380601_pi300-10000_cl_pass0_src1.csv
[Thu Feb 16 16:59:42 2012] fullrun_mos1_xmm0511380601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 16 16:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511380601_pi300-10000_cl_pass0_src1.csv
[Thu Feb 16 16:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511380601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511380601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 16:59:42 2012] fullrun_mos1_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 16 16:59:42 2012] fullrun_mos1_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 16 16:59:42 2012] Fit fullrun_mos1_xmm0511380601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 16 17:29:30 2012] Spatial fit model total counts = 2094.000000, observed total counts = 2094.000000
[Thu Feb 16 17:29:30 2012] Offset between fit and detection position for source 1 = 0.149734 pixels
[Thu Feb 16 17:29:30 2012] 2094.325000 total counts/ 706.265000 bgd. counts: snr = 52.230526
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.149734 pixels
  Position = (442.1, 259.2) = 0 42 42.45 40 51 51.6
  Extent = 6.2 (5.9-6.5)", rotation angle = 0
  Source counts = 1388.1 +/- 45.8
  Background counts = 706.3
  Rate = 0.05 +/- 0.002
[Thu Feb 16 17:29:30 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 17:29:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 17:29:30 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 17:29:30 2012] Source does appear to be extended
[Thu Feb 16 17:29:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 05:46:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 05:46:02 2012] Initial guess for spatial extent in simple fitting = 6.19"
[Fri Feb 17 05:46:02 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.082
[Fri Feb 17 05:46:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.19"
[Fri Feb 17 06:07:02 2012] fullrun_mos1_xmm0511380601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 17 06:07:02 2012] fullrun_mos1_xmm0511380601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 17 06:07:02 2012] Fit fullrun_mos1_xmm0511380601_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Feb 17 06:07:03 2012] fullrun_mos1_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 06:07:03 2012] fullrun_mos1_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 06:07:03 2012] Fit fullrun_mos1_xmm0511380601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 06:30:53 2012] Spatial fit model total counts = 1855.000000, observed total counts = 1855.000000
[Fri Feb 17 06:30:53 2012] Offset between fit and detection position for source 1 = 0.020486 pixels
[Fri Feb 17 06:30:53 2012] 1861.997000 total counts/ 548.217000 bgd. counts: snr = 56.110792
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.020486 pixels
  Position = (442.1, 259.2) = 0 42 42.46 40 51 51.6
  Extent = 5.8 (5.5-6.1)", rotation angle = 0
  Source counts = 1313.8 +/- 43.2
  Background counts = 548.2
  Rate = 0.05 +/- 0.002
[Fri Feb 17 06:30:53 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 06:30:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 06:30:53 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 06:30:53 2012] Source does appear to be extended
[Fri Feb 17 06:30:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 10:17:10 2012] Counts = 1313.780000, rescaling region sizes by 2.000000
[Fri Feb 17 10:17:10 2012] XMMSAS src. selection expression = ellipse(38413.781320, 22504.654800, 691.074020, 691.074020, 0.000000, X, Y)
[Fri Feb 17 10:17:10 2012] Writing source region out to fullrun_mos1_xmm0511380601_pi300-10000_pass1_cl_src1_src.reg
[Fri Feb 17 10:17:10 2012] Extracting stamp from image fullrun_mos1_xmm0511380601_pi300-10000_cl_sm2.00.img.gz, (402, 220) - (482, 299)
[Fri Feb 17 10:17:10 2012] XMMSAS bgd. selection expression = annulus(38413.781320, 22504.654800, 2303.580066, 4607.160133, X, Y) && !ellipse(40132.463806, 18635.384552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41842.619191, 26762.619508, 1009.008029, 385.596723, 65.581665, X, Y)
[Fri Feb 17 10:17:10 2012] Writing fullrun_mos1_xmm0511380601_pi300-10000_pass1_cl_src1.gif
[Fri Feb 17 10:17:14 2012] Mean detx,y = (4066.76, 10377.31) 
[Fri Feb 17 10:17:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 10:18:10 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 10:18:10 2012] Setting source spectrum file to fullrun_mos1_xmm0511380601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 17 10:18:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511380601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Feb 17 11:12:42 2012] Updating aperture counts using extracted products
[Fri Feb 17 11:12:42 2012] Error reading totcts from fullrun_mos1_xmm0511380601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 17 11:12:43 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 11:12:43 2012] Using photon index=1.80, rate=0.0501, arf fullrun_mos1_xmm0511380601_pi300-10000_pass1_cl_src1.arf
[Fri Feb 17 11:12:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 11:12:43 2012] Updating source flux to 8.1e-13
[Fri Feb 17 11:13:38 2012] Reading fit data from xmm0511380601/analysis//spectral/fullrun_mos1_xmm0511380601_pi300-10000_pass1_cl_src1_pl.csv
[Fri Feb 17 11:13:38 2012] Spectral fit parameter nH value = 9.76741e+20
[Fri Feb 17 11:13:38 2012] Spectral fit parameter PhoIndex value = 1.83108
[Fri Feb 17 11:13:38 2012] Failed to get F(0.3-8.0) from xmm0511380601/analysis//spectral/fullrun_mos1_xmm0511380601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 11:13:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 11:13:38 2012] Using Nh = 9.8e+20, photon index=1.83, rate=0.0501, arf fullrun_mos1_xmm0511380601_pi300-10000_pass1_cl_src1.arf
[Fri Feb 17 11:13:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 11:13:38 2012] Updating source flux to 8.7e-13