[Mon Feb 27 09:18:59 2012] Detection parameters:
  Position = (389.5, 471.9) = 0 39 13.42 41 10 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.9 +/- 13.0
  Background counts = 31.9
  Rate = 0.002 +/- 0.0004

[Mon Feb 27 09:19:00 2012] Off-axis axis estimate = 14.20'
[Mon Feb 27 09:23:41 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 09:23:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 27 09:23:41 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Mon Feb 27 09:23:41 2012] source mask rpix=3.1, npix_max = 52, mask sum = 37, frac = 0.710
[Mon Feb 27 09:23:41 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 13.53"
[Mon Feb 27 11:36:03 2012] fullrun_pn_xmm0511380301_pi300-10000_cl_pass0_src7.ximg exists
[Mon Feb 27 11:36:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380301_pi300-10000_cl_pass0_src7.csv
[Mon Feb 27 11:36:03 2012] fullrun_pn_xmm0511380301_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Feb 27 11:36:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380301_pi300-10000_cl_pass0_src7.csv
[Mon Feb 27 11:36:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 11:36:04 2012] fullrun_pn_xmm0511380301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Feb 27 11:36:04 2012] fullrun_pn_xmm0511380301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Feb 27 11:36:04 2012] Fit fullrun_pn_xmm0511380301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Feb 27 13:44:58 2012] Source 7 is offset by 7.773969 and -4.021964 pixels which is larger than
2 X fitted extent = 1.555191 x 1.555191, not incorporating fit results
[Mon Feb 27 13:44:58 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.077839 pixels away
[Mon Feb 27 13:44:58 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 13:44:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 13:44:58 2012] Assessing source extent using major
[Mon Feb 27 13:44:58 2012] Source does appear to be extended
[Mon Feb 27 13:44:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 13:45:35 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 13:45:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 27 13:45:35 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Mon Feb 27 13:45:35 2012] source mask rpix=3.1, npix_max = 52, mask sum = 37, frac = 0.710
[Mon Feb 27 13:45:35 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 13.53"
[Mon Feb 27 16:37:19 2012] fullrun_pn_xmm0511380301_pi300-10000_cl_pass1_src7.ximg exists
[Mon Feb 27 16:37:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380301_pi300-10000_cl_pass1_src7.csv
[Mon Feb 27 16:37:19 2012] fullrun_pn_xmm0511380301_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Feb 27 16:37:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511380301_pi300-10000_cl_pass1_src7.csv
[Mon Feb 27 16:37:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511380301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511380301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 16:37:19 2012] fullrun_pn_xmm0511380301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Feb 27 16:37:19 2012] fullrun_pn_xmm0511380301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Feb 27 16:37:19 2012] Fit fullrun_pn_xmm0511380301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Feb 27 18:38:18 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 17.165788 pixels away
[Mon Feb 27 18:38:18 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.659163 pixels away
[Mon Feb 27 18:38:18 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 18:38:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 18:38:18 2012] Assessing source extent using major
[Mon Feb 27 18:38:18 2012] Source does appear to be extended
[Mon Feb 27 18:38:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 18:38:51 2012] XMMSAS src. selection expression = ellipse(33838.305328, 41005.955170, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 18:38:51 2012] Writing source region out to fullrun_pn_xmm0511380301_pi300-10000_pass1_cl_src7_src.reg
[Mon Feb 27 18:38:51 2012] Extracting stamp from image fullrun_pn_xmm0511380301_pi300-10000_cl_sm2.00.img.gz, (352, 434) - (427, 509)
[Mon Feb 27 18:38:51 2012] XMMSAS bgd. selection expression = annulus(33838.305328, 41005.955170, 1087.500000, 2175.000000, X, Y) && !ellipse(32068.977875, 42676.491638, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 18:38:51 2012] Writing fullrun_pn_xmm0511380301_pi300-10000_pass1_cl_src7.gif
[Mon Feb 27 18:50:29 2012] Mean detx,y = (876.01, -15451.36) 
[Mon Feb 27 18:50:35 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 18:51:00 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 18:51:00 2012] Setting source spectrum file to fullrun_pn_xmm0511380301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Feb 27 18:51:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511380301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Feb 27 20:01:33 2012] Not generating rmf since there are only 63 counts
[Mon Feb 27 20:01:33 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:06:30 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:06:30 2012] Error reading totcts from fullrun_pn_xmm0511380301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Feb 27 22:06:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:06:33 2012] Using photon index=1.80, rate=0.00188, arf fullrun_pn_xmm0511380301_pi300-10000_pass1_cl_src7.arf
[Mon Feb 27 22:06:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:06:33 2012] Updating source flux to 3.3e-14
[Mon Feb 27 22:09:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting