[Mon Feb 27 09:20:10 2012] Detection parameters:
  Position = (232.2, 191.3) = 0 40 13.92 40 50 4.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8669.8 +/- 111.1
  Background counts = 18.9
  Rate = 0.2 +/- 0.003

[Mon Feb 27 09:20:12 2012] Off-axis axis estimate = 9.14'
[Mon Feb 27 12:36:59 2012] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 12:36:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 27 12:36:59 2012] Initial guess for spatial extent in simple fitting = 11.00"
[Mon Feb 27 12:36:59 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.982
[Mon Feb 27 12:36:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.00"
[Mon Feb 27 13:44:41 2012] fullrun_mos2_xmm0511380301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 27 13:44:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511380301_pi300-10000_cl_pass0_src1.csv
[Mon Feb 27 13:44:41 2012] fullrun_mos2_xmm0511380301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 27 13:44:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511380301_pi300-10000_cl_pass0_src1.csv
[Mon Feb 27 13:44:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511380301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511380301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 13:44:41 2012] fullrun_mos2_xmm0511380301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 27 13:44:41 2012] fullrun_mos2_xmm0511380301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 27 13:44:41 2012] Fit fullrun_mos2_xmm0511380301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 27 13:45:15 2012] Spatial fit model total counts = 8545.000000, observed total counts = 8545.000000
[Mon Feb 27 13:45:15 2012] Offset between fit and detection position for source 1 = 0.246528 pixels
[Mon Feb 27 13:45:15 2012] 8592.010000 total counts/ 1987.660000 bgd. counts: snr = 148.135460
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.246528 pixels
  Position = (232.3, 191.5) = 0 40 13.87 40 50 4.1
  Extent = 6.6 (6.5-6.8)", rotation angle = 0
  Source counts = 6604.4 +/- 92.7
  Background counts = 1987.7
  Rate = 0.2 +/- 0.003
[Mon Feb 27 13:45:15 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 13:45:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 13:45:15 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 13:45:15 2012] Source does appear to be extended
[Mon Feb 27 13:45:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 17:35:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 27 17:35:57 2012] Initial guess for spatial extent in simple fitting = 6.65"
[Mon Feb 27 17:35:57 2012] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.216
[Mon Feb 27 17:35:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.65"
[Mon Feb 27 18:38:01 2012] fullrun_mos2_xmm0511380301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 27 18:38:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511380301_pi300-10000_cl_pass1_src1.csv
[Mon Feb 27 18:38:01 2012] fullrun_mos2_xmm0511380301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 27 18:38:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511380301_pi300-10000_cl_pass1_src1.csv
[Mon Feb 27 18:38:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511380301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511380301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 18:38:01 2012] fullrun_mos2_xmm0511380301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 27 18:38:01 2012] fullrun_mos2_xmm0511380301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 27 18:38:01 2012] Fit fullrun_mos2_xmm0511380301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 27 18:38:33 2012] Warning, spatial fit 1 centroid is now closest to src. 26
[Mon Feb 27 18:38:33 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 18:38:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 18:38:33 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 18:38:33 2012] Source does appear to be extended
[Mon Feb 27 18:38:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 21:21:00 2012] Counts = 6604.350000, rescaling region sizes by 2.000000
[Mon Feb 27 21:21:00 2012] XMMSAS src. selection expression = ellipse(20160.018600, 16609.638200, 797.420423, 797.420423, 0.000000, X, Y)
[Mon Feb 27 21:21:00 2012] Writing source region out to fullrun_mos2_xmm0511380301_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 27 21:21:00 2012] Extracting stamp from image fullrun_mos2_xmm0511380301_pi300-10000_cl_sm2.00.img.gz, (186, 146) - (278, 237)
[Mon Feb 27 21:21:00 2012] XMMSAS bgd. selection expression = annulus(20160.018600, 16609.638200, 2658.068076, 5316.136153, X, Y) && !ellipse(22057.159760, 17276.260452, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 21:21:00 2012] Writing fullrun_mos2_xmm0511380301_pi300-10000_pass1_cl_src1.gif
[Mon Feb 27 21:21:08 2012] Mean detx,y = (3078.69, -12399.75) 
[Mon Feb 27 21:21:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 21:22:09 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 21:22:09 2012] Setting source spectrum file to fullrun_mos2_xmm0511380301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 27 21:22:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511380301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 27 22:06:38 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:06:38 2012] Error reading totcts from fullrun_mos2_xmm0511380301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 27 22:06:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:06:39 2012] Using photon index=1.80, rate=0.186, arf fullrun_mos2_xmm0511380301_pi300-10000_pass1_cl_src1.arf
[Mon Feb 27 22:06:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:06:40 2012] Updating source flux to 3.7e-12
[Mon Feb 27 22:09:13 2012] Reading fit data from xmm0511380301/analysis//spectral/fullrun_mos2_xmm0511380301_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 27 22:09:13 2012] Spectral fit parameter nH value = 4.40135e+21
[Mon Feb 27 22:09:13 2012] Spectral fit parameter PhoIndex value = 2.0878
[Mon Feb 27 22:09:13 2012] Failed to get F(0.3-8.0) from xmm0511380301/analysis//spectral/fullrun_mos2_xmm0511380301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 27 22:09:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:09:13 2012] Using Nh = 4.4e+21, photon index=2.09, rate=0.186, arf fullrun_mos2_xmm0511380301_pi300-10000_pass1_cl_src1.arf
[Mon Feb 27 22:09:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:09:13 2012] Updating source flux to 4.3e-12