[Sat Feb 11 03:16:38 2012] Detection parameters:
  Position = (155.5, 229.9) = 0 39 54.46 40 8 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.9 +/- 13.0
  Background counts = 15.0
  Rate = 0.002 +/- 0.0003

[Sat Feb 11 03:16:38 2012] Off-axis axis estimate = 11.49'
[Sat Feb 11 04:11:52 2012] Using EEF radius (= 12.17 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 04:11:52 2012] Initial guess for spatial extent in simple fitting = 12.17"
[Sat Feb 11 04:11:52 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.965
[Sat Feb 11 04:11:52 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.17"
[Sat Feb 11 04:38:01 2012] fullrun_mos2_xmm0511380101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Feb 11 04:38:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511380101_pi300-10000_cl_pass0_src11.csv
[Sat Feb 11 04:38:01 2012] fullrun_mos2_xmm0511380101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Feb 11 04:38:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511380101_pi300-10000_cl_pass0_src11.csv
[Sat Feb 11 04:38:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511380101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511380101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 04:38:01 2012] fullrun_mos2_xmm0511380101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Feb 11 04:38:01 2012] fullrun_mos2_xmm0511380101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Feb 11 04:38:01 2012] Fit fullrun_mos2_xmm0511380101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Feb 11 04:38:11 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.065863 pixels away
[Sat Feb 11 04:38:11 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 04:38:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 04:38:11 2012] Assessing source extent using major
[Sat Feb 11 04:38:11 2012] Source does appear to be extended
[Sat Feb 11 04:38:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 05:30:35 2012] Using EEF radius (= 12.17 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 05:30:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 11 05:30:35 2012] Initial guess for spatial extent in simple fitting = 12.17"
[Sat Feb 11 05:30:35 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.965
[Sat Feb 11 05:30:35 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.17"
[Sat Feb 11 05:49:05 2012] fullrun_mos2_xmm0511380101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Feb 11 05:49:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511380101_pi300-10000_cl_pass1_src11.csv
[Sat Feb 11 05:49:05 2012] fullrun_mos2_xmm0511380101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Feb 11 05:49:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511380101_pi300-10000_cl_pass1_src11.csv
[Sat Feb 11 05:49:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511380101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511380101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 05:49:05 2012] fullrun_mos2_xmm0511380101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Feb 11 05:49:05 2012] fullrun_mos2_xmm0511380101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Feb 11 05:49:05 2012] Fit fullrun_mos2_xmm0511380101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Feb 11 05:49:14 2012] Spatial fit model total counts = 242.746000, observed total counts = 243.000000
[Sat Feb 11 05:49:14 2012] Offset between fit and detection position for source 6 = 0.072647 pixels
[Sat Feb 11 05:49:14 2012] 242.868800 total counts/ 188.762000 bgd. counts: snr = 3.938171
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.072647 pixels
  Position = (155.6, 230.0) = 0 39 54.44 40 8 59.2
  Extent = 4.9 (3.7-6.6)", rotation angle = 0
  Source counts = 54.1 +/- 15.6
  Background counts = 188.8
  Rate = 0.001 +/- 0.0003
[Sat Feb 11 05:49:14 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 05:49:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 05:49:14 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 05:49:14 2012] Source does appear to be extended
[Sat Feb 11 05:49:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 06:52:23 2012] XMMSAS src. selection expression = ellipse(13486.277900, 19958.287400, 292.972808, 292.972808, 0.000000, X, Y)
[Sat Feb 11 06:52:23 2012] Writing source region out to fullrun_mos2_xmm0511380101_pi300-10000_pass1_cl_src6_src.reg
[Sat Feb 11 06:52:23 2012] Extracting stamp from image fullrun_mos2_xmm0511380101_pi300-10000_cl_sm2.00.img.gz, (139, 213) - (172, 247)
[Sat Feb 11 06:52:23 2012] XMMSAS bgd. selection expression = annulus(13486.277900, 19958.287400, 488.288014, 976.576028, X, Y)
[Sat Feb 11 06:52:23 2012] Writing fullrun_mos2_xmm0511380101_pi300-10000_pass1_cl_src6.gif
[Sat Feb 11 06:54:15 2012] Mean detx,y = (10867.74, -11443.38) 
[Sat Feb 11 06:54:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 11 06:54:20 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 11 06:54:20 2012] Setting source spectrum file to fullrun_mos2_xmm0511380101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Feb 11 06:54:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511380101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Feb 11 07:09:30 2012] Not generating rmf since there are only 54 counts
[Sat Feb 11 07:09:30 2012] rmf not generated due to insufficient counts
[Sat Feb 11 07:14:08 2012] Updating aperture counts using extracted products
[Sat Feb 11 07:14:08 2012] Error reading totcts from fullrun_mos2_xmm0511380101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Feb 11 07:14:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 07:14:08 2012] Using photon index=1.80, rate=0.00119, arf fullrun_mos2_xmm0511380101_pi300-10000_pass1_cl_src6.arf
[Sat Feb 11 07:14:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 11 07:14:08 2012] Updating source flux to 5.3e-14
[Sat Feb 11 07:14:22 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting