[Sat Feb 11 03:16:22 2012] Detection parameters:
  Position = (363.2, 398.3) = 0 38 35.58 40 21 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.6 +/- 13.7
  Background counts = 18.0
  Rate = 0.002 +/- 0.0006

[Sat Feb 11 03:16:22 2012] Off-axis axis estimate = 8.63'
[Sat Feb 11 03:53:25 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 03:53:25 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Sat Feb 11 03:53:25 2012] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.822
[Sat Feb 11 03:53:25 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.74"
[Sat Feb 11 04:11:52 2012] fullrun_mos1_xmm0511380101_pi300-10000_cl_pass0_src8.ximg exists
[Sat Feb 11 04:11:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511380101_pi300-10000_cl_pass0_src8.csv
[Sat Feb 11 04:11:52 2012] fullrun_mos1_xmm0511380101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Feb 11 04:11:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511380101_pi300-10000_cl_pass0_src8.csv
[Sat Feb 11 04:11:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511380101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511380101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 04:11:52 2012] fullrun_mos1_xmm0511380101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Feb 11 04:11:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511380101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat Feb 11 04:11:52 2012] fullrun_mos1_xmm0511380101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Feb 11 04:11:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511380101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat Feb 11 04:11:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511380101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511380101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 04:38:08 2012] Source 10 is offset by -3.020609 and 4.857996 pixels which is larger than
2 X fitted extent = 1.234883 x 1.234883, not incorporating fit results
[Sat Feb 11 04:38:08 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 04:38:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 04:38:08 2012] Assessing source extent using major
[Sat Feb 11 04:38:08 2012] Source does appear to be extended
[Sat Feb 11 04:38:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 05:10:10 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 05:10:10 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Sat Feb 11 05:10:10 2012] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.822
[Sat Feb 11 05:10:10 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.74"
[Sat Feb 11 05:30:35 2012] fullrun_mos1_xmm0511380101_pi300-10000_cl_pass1_src8.ximg exists
[Sat Feb 11 05:30:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511380101_pi300-10000_cl_pass1_src8.csv
[Sat Feb 11 05:30:35 2012] fullrun_mos1_xmm0511380101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Feb 11 05:30:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511380101_pi300-10000_cl_pass1_src8.csv
[Sat Feb 11 05:30:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511380101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511380101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 05:30:35 2012] fullrun_mos1_xmm0511380101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Feb 11 05:30:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511380101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat Feb 11 05:30:35 2012] fullrun_mos1_xmm0511380101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Feb 11 05:30:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0511380101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat Feb 11 05:30:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511380101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511380101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 05:49:12 2012] Source 10 is offset by 8.062840 and 1.822157 pixels which is larger than
2 X fitted extent = 6.757380 x 6.757380, not incorporating fit results
[Sat Feb 11 05:49:12 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 05:49:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 05:49:12 2012] Assessing source extent using major
[Sat Feb 11 05:49:12 2012] Source does appear to be extended
[Sat Feb 11 05:49:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 06:41:58 2012] XMMSAS src. selection expression = ellipse(31553.857056, 34601.769623, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Feb 11 06:41:58 2012] Writing source region out to fullrun_mos1_xmm0511380101_pi300-10000_pass1_cl_src10_src.reg
[Sat Feb 11 06:41:58 2012] Extracting stamp from image fullrun_mos1_xmm0511380101_pi300-10000_cl_sm2.00.img.gz, (326, 361) - (401, 436)
[Sat Feb 11 06:41:58 2012] XMMSAS bgd. selection expression = annulus(31553.857056, 34601.769623, 1087.500000, 2175.000000, X, Y) && !ellipse(32131.518800, 34971.480600, 556.827216, 556.827216, 0.000000, X, Y)
[Sat Feb 11 06:41:58 2012] Writing fullrun_mos1_xmm0511380101_pi300-10000_pass1_cl_src10.gif
[Sat Feb 11 06:43:19 2012] Mean detx,y = (9032.55, 1316.17) 
[Sat Feb 11 06:43:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 11 06:43:30 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 11 06:43:30 2012] Setting source spectrum file to fullrun_mos1_xmm0511380101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Feb 11 06:43:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511380101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Feb 11 06:51:45 2012] Not generating rmf since there are only 46 counts
[Sat Feb 11 06:51:45 2012] rmf not generated due to insufficient counts
[Sat Feb 11 07:14:08 2012] Updating aperture counts using extracted products
[Sat Feb 11 07:14:08 2012] Error reading totcts from fullrun_mos1_xmm0511380101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Feb 11 07:14:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 07:14:08 2012] Using photon index=1.80, rate=0.00189, arf fullrun_mos1_xmm0511380101_pi300-10000_pass1_cl_src10.arf
[Sat Feb 11 07:14:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 11 07:14:08 2012] Updating source flux to 3.3e-14
[Sat Feb 11 07:14:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting