[Thu May  3 17:40:39 2012] Detection parameters:
  Position = (366.4, 488.8) = 0 24 49.52 64 21 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.6 +/- 22.8
  Background counts = 177.1
  Rate = 0.006 +/- 0.0008

[Thu May  3 17:40:54 2012] Off-axis axis estimate = 14.65'
[Thu May  3 18:07:41 2012] Using EEF radius (= 13.75 ")to estimate initial spatial extent for simple fitting
[Thu May  3 18:07:41 2012] Initial guess for spatial extent in simple fitting = 13.75"
[Thu May  3 18:07:41 2012] source mask rpix=3.2, npix_max = 53, mask sum = 47, frac = 0.876
[Thu May  3 18:07:41 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 13.75"
[Sat May 12 14:11:40 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src71.ximg exists
[Sat May 12 14:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src71.csv
[Sat May 12 14:11:40 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src71_1.ximg exists
[Sat May 12 14:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src71.csv
[Sat May 12 14:11:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 14:11:43 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sat May 12 14:11:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Sat May 12 14:11:43 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sat May 12 14:11:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Sat May 12 14:11:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes