[Thu May  3 17:40:28 2012] Detection parameters:
  Position = (315.2, 336.0) = 0 25 23.87 64 10 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11368.1 +/- 144.2
  Background counts = 415.3
  Rate = 0.6 +/- 0.008

[Thu May  3 17:40:54 2012] Off-axis axis estimate = 2.98'
[Thu May  3 18:07:41 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Thu May  3 18:07:41 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Thu May  3 18:07:41 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928
[Thu May  3 18:07:41 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.92"
[Sat May 12 14:11:38 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src7.ximg exists
[Sat May 12 14:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src7.csv
[Sat May 12 14:11:38 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat May 12 14:11:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src7.csv
[Sat May 12 14:11:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 14:11:41 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat May 12 14:11:41 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat May 12 14:11:41 2012] Fit fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly