[Thu May  3 17:40:38 2012] Detection parameters:
  Position = (409.0, 475.5) = 0 24 20.96 64 20 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.0 +/- 32.2
  Background counts = 223.8
  Rate = 0.005 +/- 0.001

[Thu May  3 17:40:54 2012] Off-axis axis estimate = 15.13'
[Thu May  3 18:07:41 2012] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Thu May  3 18:07:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  3 18:07:41 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Thu May  3 18:07:41 2012] source mask rpix=3.2, npix_max = 55, mask sum = 50, frac = 0.905
[Thu May  3 18:07:41 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 14.00"
[Sat May 12 14:11:40 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src65.ximg exists
[Sat May 12 14:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src65.csv
[Sat May 12 14:11:40 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src65_1.ximg exists
[Sat May 12 14:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src65.csv
[Sat May 12 14:11:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 14:11:43 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sat May 12 14:11:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sat May 12 14:11:43 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sat May 12 14:11:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sat May 12 14:11:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes