[Thu May 3 17:40:37 2012] Detection parameters: Position = (331.0, 290.0) = 0 25 13.43 64 6 51.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 11288.8 +/- 142.9 Background counts = 354.0 Rate = 0.5 +/- 0.006 [Thu May 3 17:40:54 2012] Off-axis axis estimate = 2.44' [Thu May 3 18:07:41 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting [Thu May 3 18:07:41 2012] Initial guess for spatial extent in simple fitting = 7.65" [Thu May 3 18:07:41 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.785 [Thu May 3 18:07:41 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 7.65" [Sat May 12 14:11:40 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src60.ximg exists [Sat May 12 14:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src60.csv [Sat May 12 14:11:40 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src60_1.ximg exists [Sat May 12 14:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src60.csv [Sat May 12 14:11:40 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src60_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 12 14:11:43 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists [Sat May 12 14:11:43 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists [Sat May 12 14:11:43 2012] Fit fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly