[Thu May 3 17:40:37 2012] Detection parameters: Position = (316.8, 260.1) = 0 25 22.89 64 4 42.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 26440.1 +/- 202.9 Background counts = 374.5 Rate = 1 +/- 0.01 [Thu May 3 17:40:54 2012] Off-axis axis estimate = 3.08' [Thu May 3 18:07:41 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting [Thu May 3 18:07:41 2012] Initial guess for spatial extent in simple fitting = 7.97" [Thu May 3 18:07:41 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.919 [Thu May 3 18:07:41 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 7.97" [Sat May 12 14:11:40 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src56.ximg exists [Sat May 12 14:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src56.csv [Sat May 12 14:11:40 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src56_1.ximg exists [Sat May 12 14:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src56.csv [Sat May 12 14:11:40 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src56_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 12 14:11:43 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src56.ximg exists [Sat May 12 14:11:43 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists [Sat May 12 14:11:43 2012] Fit fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly