[Thu May  3 17:40:36 2012] Detection parameters:
  Position = (325.2, 263.0) = 0 25 17.30 64 4 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32923.6 +/- 220.5
  Background counts = 351.3
  Rate = 2 +/- 0.01

[Thu May  3 17:40:54 2012] Off-axis axis estimate = 3.22'
[Thu May  3 18:07:41 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Thu May  3 18:07:41 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Thu May  3 18:07:41 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.907
[Thu May  3 18:07:41 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 8.04"
[Sat May 12 14:11:40 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src54.ximg exists
[Sat May 12 14:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src54.csv
[Sat May 12 14:11:40 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src54_1.ximg exists
[Sat May 12 14:11:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src54.csv
[Sat May 12 14:11:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 14:11:43 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sat May 12 14:11:43 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sat May 12 14:11:43 2012] Fit fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly