[Thu May  3 17:40:35 2012] Detection parameters:
  Position = (335.8, 274.2) = 0 25 10.25 64 5 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16620.8 +/- 159.8
  Background counts = 333.9
  Rate = 0.8 +/- 0.008

[Thu May  3 17:40:54 2012] Off-axis axis estimate = 3.23'
[Thu May  3 18:07:41 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Thu May  3 18:07:41 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Thu May  3 18:07:41 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.133
[Thu May  3 18:07:41 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 8.04"
[Sat May 12 14:11:39 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src47.ximg exists
[Sat May 12 14:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src47.csv
[Sat May 12 14:11:39 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src47_1.ximg exists
[Sat May 12 14:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src47.csv
[Sat May 12 14:11:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 14:11:43 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sat May 12 14:11:43 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sat May 12 14:11:43 2012] Fit fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly