[Thu May  3 17:40:33 2012] Detection parameters:
  Position = (364.0, 289.1) = 0 24 51.49 64 6 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27285.0 +/- 202.2
  Background counts = 336.2
  Rate = 1 +/- 0.01

[Thu May  3 17:40:54 2012] Off-axis axis estimate = 4.80'
[Thu May  3 18:07:41 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Thu May  3 18:07:41 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Thu May  3 18:07:41 2012] source mask rpix=2.0, npix_max = 25, mask sum = 29, frac = 1.133
[Thu May  3 18:07:41 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.83"
[Sat May 12 14:11:39 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src35.ximg exists
[Sat May 12 14:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src35.csv
[Sat May 12 14:11:39 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src35_1.ximg exists
[Sat May 12 14:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src35.csv
[Sat May 12 14:11:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 14:11:42 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sat May 12 14:11:42 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sat May 12 14:11:42 2012] Fit fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly