[Thu May 3 17:40:33 2012] Detection parameters: Position = (294.0, 292.0) = 0 25 38.00 64 7 2.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 11603.0 +/- 145.5 Background counts = 453.8 Rate = 0.5 +/- 0.007 [Thu May 3 17:40:54 2012] Off-axis axis estimate = 0.57' [Thu May 3 18:07:41 2012] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting [Thu May 3 18:07:41 2012] Initial guess for spatial extent in simple fitting = 6.71" [Thu May 3 18:07:41 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958 [Thu May 3 18:07:41 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 6.71" [Sat May 12 14:11:39 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src34.ximg exists [Sat May 12 14:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src34.csv [Sat May 12 14:11:39 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src34_1.ximg exists [Sat May 12 14:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src34.csv [Sat May 12 14:11:39 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src34_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 12 14:11:42 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists [Sat May 12 14:11:42 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists [Sat May 12 14:11:42 2012] Fit fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly