[Thu May  3 17:40:31 2012] Detection parameters:
  Position = (326.2, 305.0) = 0 25 16.55 64 7 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13772.9 +/- 155.6
  Background counts = 383.4
  Rate = 0.6 +/- 0.007

[Thu May  3 17:40:54 2012] Off-axis axis estimate = 2.07'
[Thu May  3 18:07:41 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Thu May  3 18:07:41 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Thu May  3 18:07:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.815
[Thu May  3 18:07:41 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.46"
[Sat May 12 14:11:39 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src29.ximg exists
[Sat May 12 14:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src29.csv
[Sat May 12 14:11:39 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat May 12 14:11:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src29.csv
[Sat May 12 14:11:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 14:11:42 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat May 12 14:11:42 2012] fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat May 12 14:11:42 2012] Fit fullrun_pn_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly