[Thu May  3 17:41:06 2012] Detection parameters:
  Position = (324.0, 291.5) = 0 25 18.08 64 7 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5394.9 +/- 96.7
  Background counts = 309.6
  Rate = 0.2 +/- 0.004

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 1.92'
[Sat May 12 14:11:44 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Sat May 12 14:11:44 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.035
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 7.39"
[Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src67.ximg exists
[Wed May 16 04:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src67.csv
[Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src67_1.ximg exists
[Wed May 16 04:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src67.csv
[Wed May 16 04:51:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Wed May 16 04:51:39 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly