[Thu May  3 17:41:05 2012] Detection parameters:
  Position = (344.1, 297.3) = 0 25 4.69 64 7 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12040.6 +/- 135.6
  Background counts = 276.4
  Rate = 0.4 +/- 0.005

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 3.31'
[Sat May 12 14:11:44 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Sat May 12 14:11:44 2012] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.764
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.08"
[Wed May 16 04:51:34 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src22.ximg exists
[Wed May 16 04:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src22.csv
[Wed May 16 04:51:34 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed May 16 04:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src22.csv
[Wed May 16 04:51:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:37 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed May 16 04:51:37 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed May 16 04:51:37 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly