[Thu May 3 17:41:05 2012] Detection parameters: Position = (286.9, 297.9) = 0 25 42.70 64 7 27.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 3786.6 +/- 86.4 Background counts = 286.7 Rate = 0.1 +/- 0.003 [Thu May 3 17:41:08 2012] Off-axis axis estimate = 0.84' [Sat May 12 14:11:44 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting [Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 6.85" [Sat May 12 14:11:44 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.930 [Sat May 12 14:11:44 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 6.85" [Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src72.ximg exists [Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src72_1.ximg exists [Wed May 16 04:51:35 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src72 appears to have run properly [Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists [Wed May 16 04:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src72.csv [Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists [Wed May 16 04:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src72.csv [Wed May 16 04:51:39 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes