[Thu May  3 17:41:05 2012] Detection parameters:
  Position = (293.9, 297.0) = 0 25 38.04 64 7 26.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3164.6 +/- 86.1
  Background counts = 300.2
  Rate = 0.1 +/- 0.003

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 0.34'
[Sat May 12 14:11:44 2012] Using EEF radius (= 6.60 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 6.60"
[Sat May 12 14:11:44 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.983
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 6.60"
[Wed May 16 04:51:36 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src80.ximg exists
[Wed May 16 04:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src80.csv
[Wed May 16 04:51:36 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src80_1.ximg exists
[Wed May 16 04:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src80.csv
[Wed May 16 04:51:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:40 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Wed May 16 04:51:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src80.csv
[Wed May 16 04:51:40 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Wed May 16 04:51:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src80.csv
[Wed May 16 04:51:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes