[Thu May 3 17:41:04 2012] Detection parameters: Position = (297.2, 301.8) = 0 25 35.86 64 7 45.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 5505.8 +/- 96.6 Background counts = 298.8 Rate = 0.2 +/- 0.004 [Thu May 3 17:41:08 2012] Off-axis axis estimate = 0.26' [Sat May 12 14:11:44 2012] Using EEF radius (= 6.56 ")to estimate initial spatial extent for simple fitting [Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 6.56" [Sat May 12 14:11:44 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.992 [Sat May 12 14:11:44 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 6.56" [Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src65.ximg exists [Wed May 16 04:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src65.csv [Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src65_1.ximg exists [Wed May 16 04:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src65.csv [Wed May 16 04:51:35 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src65_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists [Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists [Wed May 16 04:51:39 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly