[Thu May  3 17:41:04 2012] Detection parameters:
  Position = (310.1, 304.0) = 0 25 27.27 64 7 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6062.7 +/- 101.7
  Background counts = 301.3
  Rate = 0.2 +/- 0.004

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 0.94'
[Sat May 12 14:11:44 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Sat May 12 14:11:44 2012] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.747
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 6.90"
[Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src61.ximg exists
[Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src61_1.ximg exists
[Wed May 16 04:51:35 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src61 appears to have run properly
[Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Wed May 16 04:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Wed May 16 04:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src61.csv
[Wed May 16 04:51:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes