[Thu May  3 17:41:03 2012] Detection parameters:
  Position = (300.2, 308.1) = 0 25 33.89 64 8 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4107.6 +/- 87.3
  Background counts = 279.3
  Rate = 0.2 +/- 0.003

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 0.71'
[Sat May 12 14:11:44 2012] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Sat May 12 14:11:44 2012] source mask rpix=1.6, npix_max = 16, mask sum = 13, frac = 0.766
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 6.78"
[Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src71.ximg exists
[Wed May 16 04:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src71.csv
[Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src71_1.ximg exists
[Wed May 16 04:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src71.csv
[Wed May 16 04:51:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Wed May 16 04:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Wed May 16 04:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Wed May 16 04:51:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes