[Thu May  3 17:41:02 2012] Detection parameters:
  Position = (294.7, 310.1) = 0 25 37.50 64 8 21.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3161.2 +/- 78.0
  Background counts = 283.9
  Rate = 0.1 +/- 0.003

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 0.89'
[Sat May 12 14:11:44 2012] Using EEF radius (= 6.87 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 6.87"
[Sat May 12 14:11:44 2012] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.751
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 6.87"
[Wed May 16 04:51:36 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src77.ximg exists
[Wed May 16 04:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src77.csv
[Wed May 16 04:51:36 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src77_1.ximg exists
[Wed May 16 04:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src77.csv
[Wed May 16 04:51:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Wed May 16 04:51:40 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Wed May 16 04:51:40 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly