[Thu May  3 17:41:01 2012] Detection parameters:
  Position = (373.9, 327.2) = 0 24 44.81 64 9 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9115.0 +/- 119.1
  Background counts = 203.5
  Rate = 0.4 +/- 0.005

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 5.86'
[Sat May 12 14:11:44 2012] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 9.36"
[Sat May 12 14:11:44 2012] source mask rpix=2.2, npix_max = 28, mask sum = 28, frac = 0.996
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.36"
[Wed May 16 04:51:34 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src29.ximg exists
[Wed May 16 04:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src29.csv
[Wed May 16 04:51:34 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed May 16 04:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src29.csv
[Wed May 16 04:51:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:37 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed May 16 04:51:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Wed May 16 04:51:37 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed May 16 04:51:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Wed May 16 04:51:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes