[Thu May  3 17:41:01 2012] Detection parameters:
  Position = (349.9, 327.9) = 0 25 0.77 64 9 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9941.9 +/- 125.4
  Background counts = 219.1
  Rate = 0.4 +/- 0.005

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 4.30'
[Sat May 12 14:11:44 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Sat May 12 14:11:44 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.023
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.58"
[Wed May 16 04:51:34 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src28.ximg exists
[Wed May 16 04:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src28.csv
[Wed May 16 04:51:34 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed May 16 04:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src28.csv
[Wed May 16 04:51:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:37 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed May 16 04:51:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed May 16 04:51:37 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed May 16 04:51:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed May 16 04:51:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes