[Thu May 3 17:41:01 2012] Detection parameters: Position = (284.9, 328.0) = 0 25 44.02 64 9 38.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 7481.9 +/- 111.3 Background counts = 233.5 Rate = 0.3 +/- 0.004 [Thu May 3 17:41:08 2012] Off-axis axis estimate = 2.36' [Sat May 12 14:11:44 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting [Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 7.61" [Sat May 12 14:11:44 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.791 [Sat May 12 14:11:44 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 7.61" [Wed May 16 04:51:34 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src44.ximg exists [Wed May 16 04:51:34 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src44_1.ximg exists [Wed May 16 04:51:34 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src44 appears to have run properly [Wed May 16 04:51:38 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists [Wed May 16 04:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src44.csv [Wed May 16 04:51:38 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists [Wed May 16 04:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src44.csv [Wed May 16 04:51:38 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes