[Thu May  3 17:41:00 2012] Detection parameters:
  Position = (376.8, 340.4) = 0 24 42.85 64 10 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.9 +/- 29.3
  Background counts = 180.0
  Rate = 0.01 +/- 0.001

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 6.45'
[Sat May 12 14:11:44 2012] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 9.65"
[Sat May 12 14:11:44 2012] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.676
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 9.65"
[Wed May 16 04:51:36 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src85.ximg exists
[Wed May 16 04:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src85.csv
[Wed May 16 04:51:36 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src85_1.ximg exists
[Wed May 16 04:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src85.csv
[Wed May 16 04:51:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:40 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Wed May 16 04:51:40 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Wed May 16 04:51:40 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly