[Thu May  3 17:40:56 2012] Detection parameters:
  Position = (292.2, 346.1) = 0 25 39.18 64 10 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14216.9 +/- 145.4
  Background counts = 197.8
  Rate = 0.6 +/- 0.006

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 3.48'
[Sat May 12 14:11:44 2012] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Sat May 12 14:11:44 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.884
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.17"
[Wed May 16 04:51:33 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src6.ximg exists
[Wed May 16 04:51:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src6.csv
[Wed May 16 04:51:33 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed May 16 04:51:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src6.csv
[Wed May 16 04:51:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:36 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed May 16 04:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed May 16 04:51:36 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed May 16 04:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed May 16 04:51:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes