[Thu May  3 17:40:59 2012] Detection parameters:
  Position = (281.2, 350.0) = 0 25 46.54 64 11 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3984.1 +/- 81.2
  Background counts = 178.3
  Rate = 0.2 +/- 0.004

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 3.94'
[Sat May 12 14:11:44 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Sat May 12 14:11:44 2012] source mask rpix=1.9, npix_max = 23, mask sum = 19, frac = 0.804
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 8.40"
[Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src69.ximg exists
[Wed May 16 04:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src69.csv
[Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src69_1.ximg exists
[Wed May 16 04:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src69.csv
[Wed May 16 04:51:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Wed May 16 04:51:39 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Wed May 16 04:51:39 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly