[Thu May  3 17:40:59 2012] Detection parameters:
  Position = (354.1, 349.5) = 0 24 57.94 64 11 7.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5416.3 +/- 97.3
  Background counts = 177.6
  Rate = 0.2 +/- 0.004

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 5.48'
[Sat May 12 14:11:44 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Sat May 12 14:11:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 15, frac = 0.551
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 9.17"
[Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src59.ximg exists
[Wed May 16 04:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src59.csv
[Wed May 16 04:51:35 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src59_1.ximg exists
[Wed May 16 04:51:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src59.csv
[Wed May 16 04:51:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:38 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Wed May 16 04:51:38 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Wed May 16 04:51:39 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly