[Thu May 3 17:40:59 2012] Detection parameters: Position = (344.2, 353.7) = 0 25 4.56 64 11 26.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 10256.7 +/- 124.4 Background counts = 174.6 Rate = 0.5 +/- 0.006 [Thu May 3 17:41:08 2012] Off-axis axis estimate = 5.20' [Sat May 12 14:11:44 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting [Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 9.03" [Sat May 12 14:11:44 2012] source mask rpix=2.1, npix_max = 26, mask sum = 16, frac = 0.603 [Sat May 12 14:11:44 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.03" [Wed May 16 04:51:33 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src21.ximg exists [Wed May 16 04:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src21.csv [Wed May 16 04:51:34 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src21_1.ximg exists [Wed May 16 04:51:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src21.csv [Wed May 16 04:51:34 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src21_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 16 04:51:37 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists [Wed May 16 04:51:37 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists [Wed May 16 04:51:37 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly