[Thu May  3 17:40:58 2012] Detection parameters:
  Position = (321.9, 368.2) = 0 25 19.37 64 12 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2477.0 +/- 70.4
  Background counts = 151.8
  Rate = 0.1 +/- 0.003

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 5.34'
[Sat May 12 14:11:44 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Sat May 12 14:11:44 2012] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.893
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 9.10"
[Wed May 16 04:51:36 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src81.ximg exists
[Wed May 16 04:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src81.csv
[Wed May 16 04:51:36 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src81_1.ximg exists
[Wed May 16 04:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src81.csv
[Wed May 16 04:51:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:40 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Wed May 16 04:51:40 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Wed May 16 04:51:40 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly