[Thu May  3 17:40:57 2012] Detection parameters:
  Position = (287.6, 375.0) = 0 25 42.29 64 13 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.1 +/- 18.0
  Background counts = 134.7
  Rate = 0.004 +/- 0.0009

[Thu May  3 17:41:08 2012] Off-axis axis estimate = 5.61'
[Sat May 12 14:11:44 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Sat May 12 14:11:44 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Sat May 12 14:11:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.091
[Sat May 12 14:11:44 2012] Giving source the simple spatial ID 92 for pass 0, mean size = 9.23"
[Wed May 16 04:51:36 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src92.ximg exists
[Wed May 16 04:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src92.csv
[Wed May 16 04:51:36 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src92_1.ximg exists
[Wed May 16 04:51:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src92.csv
[Wed May 16 04:51:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 04:51:40 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Wed May 16 04:51:40 2012] fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Wed May 16 04:51:40 2012] Fit fullrun_mos1_xmm0511180101_pi300-10000_cl_pass0_tfrozen_src92 appears to have run properly