[Wed Nov 23 22:19:08 2011] Detection parameters:
  Position = (226.8, 282.5) = 17 40 31.15 -28 47 29.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.2 +/- 10.4
  Background counts = 28.7
  Rate = 0.01 +/- 0.002

[Wed Nov 23 22:19:08 2011] Off-axis axis estimate = 5.32'
[Wed Nov 23 22:20:01 2011] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 22:20:01 2011] Initial guess for spatial extent in simple fitting = 9.09"
[Wed Nov 23 22:20:01 2011] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.746
[Wed Nov 23 22:20:01 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.09"
[Wed Nov 23 22:23:22 2011] fullrun_pn_xmm0511010701_pi300-10000_cl_pass0_src3.ximg exists
[Wed Nov 23 22:23:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010701_pi300-10000_cl_pass0_src3.csv
[Wed Nov 23 22:23:22 2011] fullrun_pn_xmm0511010701_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Nov 23 22:23:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010701_pi300-10000_cl_pass0_src3.csv
[Wed Nov 23 22:23:22 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 22:23:22 2011] fullrun_pn_xmm0511010701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Nov 23 22:23:22 2011] fullrun_pn_xmm0511010701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Nov 23 22:23:22 2011] Fit fullrun_pn_xmm0511010701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Nov 23 22:29:07 2011] Source 3 is offset by -8.106089 and -4.858105 pixels which is larger than
2 X fitted extent = 2.200396 x 2.200396, not incorporating fit results
[Wed Nov 23 22:29:07 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 22:29:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 22:29:07 2011] Assessing source extent using major
[Wed Nov 23 22:29:07 2011] Source does appear to be extended
[Wed Nov 23 22:29:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 23 22:29:11 2011] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 22:29:11 2011] Initial guess for spatial extent in simple fitting = 9.09"
[Wed Nov 23 22:29:11 2011] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.746
[Wed Nov 23 22:29:11 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 9.09"
[Wed Nov 23 22:32:32 2011] fullrun_pn_xmm0511010701_pi300-10000_cl_pass1_src3.ximg exists
[Wed Nov 23 22:32:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010701_pi300-10000_cl_pass1_src3.csv
[Wed Nov 23 22:32:32 2011] fullrun_pn_xmm0511010701_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Nov 23 22:32:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010701_pi300-10000_cl_pass1_src3.csv
[Wed Nov 23 22:32:32 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 22:32:32 2011] fullrun_pn_xmm0511010701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Nov 23 22:32:32 2011] fullrun_pn_xmm0511010701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Nov 23 22:32:32 2011] Fit fullrun_pn_xmm0511010701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Nov 23 22:38:43 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 71.686704 pixels away
[Wed Nov 23 22:38:43 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 123.589860 pixels away
[Wed Nov 23 22:38:43 2011] Spatial fit model total counts = 141.000000, observed total counts = 141.000000
[Wed Nov 23 22:38:43 2011] Offset between fit and detection position for source 3 = 0.751055 pixels
[Wed Nov 23 22:38:43 2011] 140.403100 total counts/ 116.462000 bgd. counts: snr = 2.218462
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.751055 pixels
  Position = (226.1, 282.9) = 17 40 31.37 -28 47 29.4
  Extent = 4.3 (2.6-6.8)", rotation angle = 0
  Source counts = 23.9 +/- 11.8
  Background counts = 116.5
  Rate = 0.004 +/- 0.002
[Wed Nov 23 22:38:43 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 22:38:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 22:38:43 2011] Assessing source extent using major axis lower bound
[Wed Nov 23 22:38:43 2011] Source does appear to be extended
[Wed Nov 23 22:38:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 23 22:38:47 2011] XMMSAS src. selection expression = ellipse(19622.089600, 24563.341400, 258.168819, 258.168819, 0.000000, X, Y)
[Wed Nov 23 22:38:47 2011] Writing source region out to fullrun_pn_xmm0511010701_pi300-10000_pass1_cl_src3_src.reg
[Wed Nov 23 22:38:47 2011] Extracting stamp from image fullrun_pn_xmm0511010701_pi300-10000_cl_sm2.00.img.gz, (211, 268) - (241, 298)
[Wed Nov 23 22:38:47 2011] XMMSAS bgd. selection expression = annulus(19622.089600, 24563.341400, 430.281365, 860.562730, X, Y)
[Wed Nov 23 22:38:47 2011] Writing fullrun_pn_xmm0511010701_pi300-10000_pass1_cl_src3.gif
[Wed Nov 23 22:39:51 2011] Mean detx,y = (5247.39, 181.58) 
[Wed Nov 23 22:39:52 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 23 22:39:59 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 23 22:40:00 2011] Setting source spectrum file to fullrun_pn_xmm0511010701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Nov 23 22:40:00 2011] Setting bgd. spectrum file to fullrun_pn_xmm0511010701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Nov 23 22:43:42 2011] Not generating rmf since there are only 23 counts
[Wed Nov 23 22:43:42 2011] rmf not generated due to insufficient counts
[Wed Nov 23 22:51:37 2011] Updating aperture counts using extracted products
[Wed Nov 23 22:51:37 2011] Error reading totcts from fullrun_pn_xmm0511010701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Nov 23 22:51:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 23 22:51:37 2011] Using photon index=1.80, rate=0.00413, arf fullrun_pn_xmm0511010701_pi300-10000_pass1_cl_src3.arf
[Wed Nov 23 22:51:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 23 22:51:37 2011] Updating source flux to 1.7e-14
[Wed Nov 23 22:51:49 2011] Flag b found in src. 3 procflags, skipping spectral fitting
[Wed Nov 23 22:51:49 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting