[Wed Nov 23 22:19:17 2011] Detection parameters:
  Position = (179.3, 401.8) = 17 40 46.81 -28 38 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.3 +/- 9.5
  Background counts = 6.3
  Rate = 0.005 +/- 0.001

[Wed Nov 23 22:19:17 2011] Off-axis axis estimate = 11.44'
[Wed Nov 23 22:23:22 2011] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 22:23:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 23 22:23:22 2011] Initial guess for spatial extent in simple fitting = 12.15"
[Wed Nov 23 22:23:22 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.969
[Wed Nov 23 22:23:22 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 12.15"
[Wed Nov 23 22:26:22 2011] fullrun_mos1_xmm0511010701_pi300-10000_cl_pass0_src4.ximg exists
[Wed Nov 23 22:26:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010701_pi300-10000_cl_pass0_src4.csv
[Wed Nov 23 22:26:22 2011] fullrun_mos1_xmm0511010701_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Nov 23 22:26:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010701_pi300-10000_cl_pass0_src4.csv
[Wed Nov 23 22:26:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 22:26:22 2011] fullrun_mos1_xmm0511010701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Nov 23 22:26:22 2011] fullrun_mos1_xmm0511010701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Nov 23 22:26:22 2011] Fit fullrun_mos1_xmm0511010701_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Nov 23 22:29:07 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.752495 pixels away
[Wed Nov 23 22:29:07 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 22:29:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 22:29:07 2011] Assessing source extent using major
[Wed Nov 23 22:29:07 2011] Source does appear to be extended
[Wed Nov 23 22:29:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 23 22:32:32 2011] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 22:32:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 23 22:32:32 2011] Initial guess for spatial extent in simple fitting = 12.15"
[Wed Nov 23 22:32:32 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.969
[Wed Nov 23 22:32:32 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 12.15"
[Wed Nov 23 22:35:35 2011] fullrun_mos1_xmm0511010701_pi300-10000_cl_pass1_src4.ximg exists
[Wed Nov 23 22:35:35 2011] fullrun_mos1_xmm0511010701_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Nov 23 22:35:35 2011] Fit fullrun_mos1_xmm0511010701_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Nov 23 22:35:35 2011] fullrun_mos1_xmm0511010701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Nov 23 22:35:35 2011] fullrun_mos1_xmm0511010701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Nov 23 22:35:35 2011] Fit fullrun_mos1_xmm0511010701_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Nov 23 22:38:44 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.752495 pixels away
[Wed Nov 23 22:38:44 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 22:38:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 22:38:44 2011] Assessing source extent using major
[Wed Nov 23 22:38:44 2011] Source does appear to be extended
[Wed Nov 23 22:38:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 23 22:43:54 2011] XMMSAS src. selection expression = ellipse(15548.169586, 34907.764404, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov 23 22:43:54 2011] Writing source region out to fullrun_mos1_xmm0511010701_pi300-10000_pass1_cl_src2_src.reg
[Wed Nov 23 22:43:54 2011] Extracting stamp from image fullrun_mos1_xmm0511010701_pi300-10000_cl_sm2.00.img.gz, (142, 364) - (217, 439)
[Wed Nov 23 22:43:54 2011] XMMSAS bgd. selection expression = annulus(15548.169586, 34907.764404, 1087.500000, 2175.000000, X, Y)
[Wed Nov 23 22:43:54 2011] Writing fullrun_mos1_xmm0511010701_pi300-10000_pass1_cl_src2.gif
[Wed Nov 23 22:44:13 2011] Mean detx,y = (-10429.17, 8888.13) 
[Wed Nov 23 22:44:14 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 23 22:44:20 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 23 22:44:20 2011] Setting source spectrum file to fullrun_mos1_xmm0511010701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Nov 23 22:44:20 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0511010701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Nov 23 22:47:39 2011] Not generating rmf since there are only 49 counts
[Wed Nov 23 22:47:39 2011] rmf not generated due to insufficient counts
[Wed Nov 23 22:51:37 2011] Updating aperture counts using extracted products
[Wed Nov 23 22:51:37 2011] Error reading totcts from fullrun_mos1_xmm0511010701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Nov 23 22:51:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 23 22:51:37 2011] Using photon index=1.80, rate=0.00547, arf fullrun_mos1_xmm0511010701_pi300-10000_pass1_cl_src2.arf
[Wed Nov 23 22:51:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 23 22:51:37 2011] Updating source flux to 1.1e-13
[Wed Nov 23 22:51:38 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting