[Fri Feb 17 21:08:53 2012] Detection parameters:
  Position = (287.8, 274.2) = 17 0 4.21 -41 58 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1060.8 +/- 39.6
  Background counts = 14.5
  Rate = 0.1 +/- 0.005

[Fri Feb 17 21:08:53 2012] Off-axis axis estimate = 1.92'
[Fri Feb 17 21:15:52 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 21:15:52 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Fri Feb 17 21:15:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Fri Feb 17 21:15:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.39"
[Fri Feb 17 21:19:54 2012] fullrun_mos1_xmm0511010601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 17 21:19:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010601_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 21:19:54 2012] fullrun_mos1_xmm0511010601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 17 21:19:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010601_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 21:19:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 21:19:54 2012] fullrun_mos1_xmm0511010601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 21:19:54 2012] fullrun_mos1_xmm0511010601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 21:19:54 2012] Fit fullrun_mos1_xmm0511010601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 21:24:34 2012] Spatial fit model total counts = 938.000000, observed total counts = 938.000000
[Fri Feb 17 21:24:34 2012] Offset between fit and detection position for source 1 = 0.096008 pixels
[Fri Feb 17 21:24:34 2012] 943.908000 total counts/ 263.981000 bgd. counts: snr = 41.848120
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.096008 pixels
  Position = (287.9, 274.3) = 17 0 4.20 -41 58 4.4
  Extent = 5.6 (5.2-6.0)", rotation angle = 0
  Source counts = 679.9 +/- 30.7
  Background counts = 264.0
  Rate = 0.1 +/- 0.004
[Fri Feb 17 21:24:34 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 21:24:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 21:24:34 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 21:24:34 2012] Source does appear to be extended
[Fri Feb 17 21:24:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 21:29:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 21:29:58 2012] Initial guess for spatial extent in simple fitting = 5.62"
[Fri Feb 17 21:29:58 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.244
[Fri Feb 17 21:29:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.62"
[Fri Feb 17 21:33:27 2012] fullrun_mos1_xmm0511010601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 17 21:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010601_pi300-10000_cl_pass1_src1.csv
[Fri Feb 17 21:33:27 2012] fullrun_mos1_xmm0511010601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 17 21:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010601_pi300-10000_cl_pass1_src1.csv
[Fri Feb 17 21:33:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 21:33:27 2012] fullrun_mos1_xmm0511010601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 21:33:27 2012] fullrun_mos1_xmm0511010601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 21:33:27 2012] Fit fullrun_mos1_xmm0511010601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 21:37:51 2012] Spatial fit model total counts = 937.903000, observed total counts = 938.000000
[Fri Feb 17 21:37:51 2012] Offset between fit and detection position for source 1 = 0.000195 pixels
[Fri Feb 17 21:37:51 2012] 943.805000 total counts/ 262.969000 bgd. counts: snr = 41.984621
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000195 pixels
  Position = (287.9, 274.3) = 17 0 4.20 -41 58 4.4
  Extent = 5.6 (5.2-6.0)", rotation angle = 0
  Source counts = 680.8 +/- 30.7
  Background counts = 263.0
  Rate = 0.1 +/- 0.004
[Fri Feb 17 21:37:51 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 21:37:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 21:37:51 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 21:37:51 2012] Source does appear to be extended
[Fri Feb 17 21:37:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 21:43:29 2012] XMMSAS src. selection expression = ellipse(24995.281520, 23811.344800, 338.636410, 338.636410, 0.000000, X, Y)
[Fri Feb 17 21:43:29 2012] Writing source region out to fullrun_mos1_xmm0511010601_pi300-10000_pass1_cl_src1_src.reg
[Fri Feb 17 21:43:29 2012] Extracting stamp from image fullrun_mos1_xmm0511010601_pi300-10000_cl_sm2.00.img.gz, (268, 255) - (307, 294)
[Fri Feb 17 21:43:29 2012] XMMSAS bgd. selection expression = annulus(24995.281520, 23811.344800, 564.394016, 1128.788032, X, Y)
[Fri Feb 17 21:43:29 2012] Writing fullrun_mos1_xmm0511010601_pi300-10000_pass1_cl_src1.gif
[Fri Feb 17 21:43:30 2012] Mean detx,y = (710.17, -470.10) 
[Fri Feb 17 21:43:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 21:43:37 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 21:43:37 2012] Setting source spectrum file to fullrun_mos1_xmm0511010601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 17 21:43:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511010601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Feb 17 21:52:45 2012] Updating aperture counts using extracted products
[Fri Feb 17 21:52:45 2012] Error reading totcts from fullrun_mos1_xmm0511010601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 17 21:52:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 21:52:45 2012] Using photon index=1.80, rate=0.0994, arf fullrun_mos1_xmm0511010601_pi300-10000_pass1_cl_src1.arf
[Fri Feb 17 21:52:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 21:52:45 2012] Updating source flux to 1.2e-12
[Fri Feb 17 21:52:54 2012] Reading fit data from xmm0511010601/analysis//spectral/fullrun_mos1_xmm0511010601_pi300-10000_pass1_cl_src1_pl.csv
[Fri Feb 17 21:52:54 2012] Spectral fit parameter nH value = 6.62112e+21
[Fri Feb 17 21:52:54 2012] Spectral fit parameter PhoIndex value = 0.489515
[Fri Feb 17 21:52:54 2012] Failed to get F(0.3-8.0) from xmm0511010601/analysis//spectral/fullrun_mos1_xmm0511010601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 21:52:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 21:52:54 2012] Using Nh = 6.6e+21, photon index=0.49, rate=0.0994, arf fullrun_mos1_xmm0511010601_pi300-10000_pass1_cl_src1.arf
[Fri Feb 17 21:52:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 21:52:54 2012] Updating source flux to 2.9e-12