[Fri Dec 23 02:21:36 2011] Detection parameters:
  Position = (475.4, 392.3) = 17 48 8.18 -27 16 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.7 +/- 10.4
  Background counts = 37.8
  Rate = 0.006 +/- 0.001

[Fri Dec 23 02:21:38 2011] Off-axis axis estimate = 14.52'
[Fri Dec 23 02:26:12 2011] Using EEF radius (= 13.69 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 02:26:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 02:26:12 2011] Initial guess for spatial extent in simple fitting = 13.69"
[Fri Dec 23 02:26:12 2011] source mask rpix=3.1, npix_max = 53, mask sum = 35, frac = 0.658
[Fri Dec 23 02:26:12 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 13.69"
[Fri Dec 23 03:44:54 2011] fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_src4.ximg exists
[Fri Dec 23 03:44:54 2011] fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Dec 23 03:44:54 2011] Fit fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_src4 appears to have run properly
[Fri Dec 23 03:44:54 2011] fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Dec 23 03:44:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Dec 23 03:44:54 2011] fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Dec 23 03:44:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Dec 23 03:44:54 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 06:40:18 2011] Spatial fit model total counts = 521.907000, observed total counts = 546.000000
[Fri Dec 23 06:40:18 2011] Offset between fit and detection position for source 4 = 4.958259 pixels
[Fri Dec 23 06:40:18 2011] 488.075000 total counts/ 277.273000 bgd. counts: snr = 12.659628
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 4.958259 pixels
  Position = (478.5, 396.1) = 17 48 7.17 -27 16 44.6
  Extent = 20.6" x 20.6", rotation angle = 0
  Source counts = 210.8 +/- 22.1
  Background counts = 277.3
  Rate = 0.04 +/- 0.004
[Fri Dec 23 06:40:18 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 06:40:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 06:40:18 2011] Assessing source extent using major
[Fri Dec 23 06:40:18 2011] Source does appear to be extended
[Fri Dec 23 06:40:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 06:40:18 2011] Source is confused with source 6
[Fri Dec 23 06:40:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 06:40:43 2011] Initial guess for spatial extent in simple fitting = 20.56"
[Fri Dec 23 06:40:43 2011] source mask rpix=4.7, npix_max = 109, mask sum = 19, frac = 0.174
[Fri Dec 23 06:40:43 2011] Skipping simple spatial due to low active detector fraction
[Fri Dec 23 10:56:44 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 10:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 10:56:44 2011] Assessing source extent using major
[Fri Dec 23 10:56:44 2011] Source does appear to be extended
[Fri Dec 23 10:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 10:57:09 2011] XMMSAS src. selection expression = ellipse(41584.250000, 34414.118000, 1233.822036, 1233.822036, 0.000000, X, Y)
[Fri Dec 23 10:57:09 2011] Writing source region out to fullrun_pn_xmm0511010301_pi300-10000_pass1_cl_src4_src.reg
[Fri Dec 23 10:57:09 2011] Extracting stamp from image fullrun_pn_xmm0511010301_pi300-10000_cl_sm2.00.img.gz, (408, 325) - (549, 467)
[Fri Dec 23 10:57:09 2011] XMMSAS bgd. selection expression = annulus(41584.250000, 34414.118000, 2056.370059, 4112.740118, X, Y) && !ellipse(39757.250000, 35197.118000, 1645.096047, 1645.096047, 0.000000, X, Y) && !ellipse(40471.252000, 34098.966000, 3290.192095, 3290.192095, 0.000000, X, Y) && !ellipse(37335.167419, 32307.489777, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 23 10:57:09 2011] Writing fullrun_pn_xmm0511010301_pi300-10000_pass1_cl_src4.gif
[Fri Dec 23 11:04:20 2011] Mean detx,y = (-16204.71, 9421.33) 
[Fri Dec 23 11:04:25 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 11:05:33 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 11:05:35 2011] Setting source spectrum file to fullrun_pn_xmm0511010301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Dec 23 11:05:35 2011] Setting bgd. spectrum file to fullrun_pn_xmm0511010301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Dec 23 13:35:43 2011] Updating aperture counts using extracted products
[Fri Dec 23 13:35:43 2011] Error reading totcts from fullrun_pn_xmm0511010301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Dec 23 13:35:44 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 13:35:44 2011] Using photon index=1.80, rate=0.0408, arf fullrun_pn_xmm0511010301_pi300-10000_pass1_cl_src4.arf
[Fri Dec 23 13:35:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 13:35:44 2011] Updating source flux to 7.1e-12
[Fri Dec 23 13:38:26 2011] Flag c found in src. 4 procflags, skipping spectral fitting