[Fri Dec 23 02:21:37 2011] Detection parameters:
  Position = (400.6, 363.9) = 17 48 32.59 -27 19 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.1 +/- 14.2
  Background counts = 56.3
  Rate = 0.008 +/- 0.002

[Fri Dec 23 02:21:38 2011] Off-axis axis estimate = 8.79'
[Fri Dec 23 02:26:12 2011] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 02:26:12 2011] Initial guess for spatial extent in simple fitting = 10.83"
[Fri Dec 23 02:26:12 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.008
[Fri Dec 23 02:26:12 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 10.83"
[Fri Dec 23 03:44:54 2011] fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_src13.ximg exists
[Fri Dec 23 03:44:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_src13.csv
[Fri Dec 23 03:44:54 2011] fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Dec 23 03:44:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_src13.csv
[Fri Dec 23 03:44:54 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 03:44:54 2011] fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Dec 23 03:44:54 2011] fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Dec 23 03:44:54 2011] Fit fullrun_pn_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Dec 23 06:40:18 2011] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.280068 pixels away
[Fri Dec 23 06:40:18 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 06:40:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 06:40:18 2011] Assessing source extent using major
[Fri Dec 23 06:40:18 2011] Source does appear to be extended
[Fri Dec 23 06:40:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 06:40:43 2011] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 06:40:43 2011] Initial guess for spatial extent in simple fitting = 10.83"
[Fri Dec 23 06:40:43 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.008
[Fri Dec 23 06:40:43 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 10.83"
[Fri Dec 23 07:48:08 2011] fullrun_pn_xmm0511010301_pi300-10000_cl_pass1_src11.ximg exists
[Fri Dec 23 07:48:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010301_pi300-10000_cl_pass1_src11.csv
[Fri Dec 23 07:48:08 2011] fullrun_pn_xmm0511010301_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Dec 23 07:48:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010301_pi300-10000_cl_pass1_src11.csv
[Fri Dec 23 07:48:08 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 07:48:09 2011] fullrun_pn_xmm0511010301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Dec 23 07:48:09 2011] fullrun_pn_xmm0511010301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Dec 23 07:48:09 2011] Fit fullrun_pn_xmm0511010301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Dec 23 10:56:44 2011] Spatial fit model total counts = 725.234000, observed total counts = 723.000000
[Fri Dec 23 10:56:44 2011] Offset between fit and detection position for source 13 = 9.963496 pixels
[Fri Dec 23 10:56:44 2011] 738.738000 total counts/ 634.953000 bgd. counts: snr = 4.118735
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 9.963496 pixels
  Position = (391.6, 359.5) = 17 48 35.52 -27 19 24.5
  Extent = 21.7 (21.6-43.3)", rotation angle = 0
  Source counts = 103.8 +/- 27.2
  Background counts = 635.0
  Rate = 0.02 +/- 0.005
[Fri Dec 23 10:56:44 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 10:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 10:56:44 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 10:56:44 2011] Source does appear to be extended
[Fri Dec 23 10:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 10:57:09 2011] XMMSAS src. selection expression = ellipse(34021.494000, 31228.316000, 1299.036037, 1299.036037, 0.000000, X, Y)
[Fri Dec 23 10:57:09 2011] Writing source region out to fullrun_pn_xmm0511010301_pi300-10000_pass1_cl_src13_src.reg
[Fri Dec 23 10:57:09 2011] Extracting stamp from image fullrun_pn_xmm0511010301_pi300-10000_cl_sm2.00.img.gz, (317, 285) - (466, 434)
[Fri Dec 23 10:57:09 2011] XMMSAS bgd. selection expression = annulus(34021.494000, 31228.316000, 2165.060062, 4330.120125, X, Y) && !ellipse(39757.250000, 35197.118000, 1645.096047, 1645.096047, 0.000000, X, Y) && !ellipse(40471.252000, 34098.966000, 3290.192095, 3290.192095, 0.000000, X, Y) && !ellipse(37335.167419, 32307.489777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29262.998000, 26644.944800, 1283.808037, 1283.808037, 0.000000, X, Y) && !ellipse(34572.766200, 26328.473200, 1604.256046, 1604.256046, 0.000000, X, Y)
[Fri Dec 23 10:57:09 2011] Writing fullrun_pn_xmm0511010301_pi300-10000_pass1_cl_src13.gif
[Fri Dec 23 11:18:44 2011] Mean detx,y = (-9175.23, 6774.20) 
[Fri Dec 23 11:18:50 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 11:20:49 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 11:20:50 2011] Setting source spectrum file to fullrun_pn_xmm0511010301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Dec 23 11:20:50 2011] Setting bgd. spectrum file to fullrun_pn_xmm0511010301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Dec 23 13:35:43 2011] Updating aperture counts using extracted products
[Fri Dec 23 13:35:43 2011] Error reading totcts from fullrun_pn_xmm0511010301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Dec 23 13:35:44 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 13:35:44 2011] Using photon index=1.80, rate=0.0201, arf fullrun_pn_xmm0511010301_pi300-10000_pass1_cl_src13.arf
[Fri Dec 23 13:35:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 13:35:44 2011] Updating source flux to 9.8e-14