[Fri Dec 23 02:22:33 2011] Detection parameters:
  Position = (174.6, 403.9) = 17 49 46.32 -27 16 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.0 +/- 9.3
  Background counts = 12.5
  Rate = 0.004 +/- 0.001

[Fri Dec 23 02:22:35 2011] Off-axis axis estimate = 11.79'
[Fri Dec 23 03:44:55 2011] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 03:44:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 03:44:55 2011] Initial guess for spatial extent in simple fitting = 12.32"
[Fri Dec 23 03:44:55 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.945
[Fri Dec 23 03:44:55 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 12.32"
[Fri Dec 23 05:54:50 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_src19.ximg exists
[Fri Dec 23 05:54:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_src19.csv
[Fri Dec 23 05:54:50 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Dec 23 05:54:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_src19.csv
[Fri Dec 23 05:54:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 05:54:51 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Dec 23 05:54:51 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Dec 23 05:54:51 2011] Fit fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Dec 23 06:40:29 2011] Source 3 is offset by -5.427333 and -7.427100 pixels which is larger than
2 X fitted extent = 1.375246 x 1.497329, not incorporating fit results
[Fri Dec 23 06:40:29 2011] Warning, spatial fit 19 centroid is now closest to src. 5
[Fri Dec 23 06:40:29 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 06:40:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 06:40:29 2011] Assessing source extent using major
[Fri Dec 23 06:40:29 2011] Source does appear to be extended
[Fri Dec 23 06:40:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 07:48:09 2011] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 07:48:09 2011] Initial guess for spatial extent in simple fitting = 12.32"
[Fri Dec 23 07:48:09 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.945
[Fri Dec 23 07:48:09 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 12.32"
[Fri Dec 23 09:53:14 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_src18.ximg exists
[Fri Dec 23 09:53:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_src18.csv
[Fri Dec 23 09:53:14 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Dec 23 09:53:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_src18.csv
[Fri Dec 23 09:53:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 09:53:14 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Dec 23 09:53:14 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Dec 23 09:53:14 2011] Fit fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Dec 23 10:56:53 2011] Source 3 is offset by 3.411334 and 5.642762 pixels which is larger than
2 X fitted extent = 1.416483 x 1.416483, not incorporating fit results
[Fri Dec 23 10:56:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 10:56:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 10:56:53 2011] Assessing source extent using major
[Fri Dec 23 10:56:53 2011] Source does appear to be extended
[Fri Dec 23 10:56:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 12:29:32 2011] XMMSAS src. selection expression = ellipse(15144.552032, 35088.322327, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 23 12:29:32 2011] Writing source region out to fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src3_src.reg
[Fri Dec 23 12:29:32 2011] Extracting stamp from image fullrun_mos1_xmm0511010301_pi300-10000_cl_sm2.00.img.gz, (137, 366) - (212, 441)
[Fri Dec 23 12:29:32 2011] XMMSAS bgd. selection expression = annulus(15144.552032, 35088.322327, 1087.500000, 2175.000000, X, Y) && !ellipse(17587.837433, 32473.991974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16012.066925, 34772.899536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13629.597626, 34953.523834, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 23 12:29:32 2011] Writing fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src3.gif
[Fri Dec 23 12:39:10 2011] Mean detx,y = (-10519.37, 9407.43) 
[Fri Dec 23 12:39:14 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 12:39:37 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 12:39:37 2011] Setting source spectrum file to fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 23 12:39:37 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Dec 23 12:58:34 2011] Not generating rmf since there are only 36 counts
[Fri Dec 23 12:58:34 2011] rmf not generated due to insufficient counts
[Fri Dec 23 13:35:46 2011] Updating aperture counts using extracted products
[Fri Dec 23 13:35:46 2011] Error reading totcts from fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 23 13:35:48 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 13:35:48 2011] Using photon index=1.80, rate=0.0043, arf fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src3.arf
[Fri Dec 23 13:35:48 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 13:35:48 2011] Updating source flux to 9.1e-14
[Fri Dec 23 13:35:50 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting