[Fri Dec 23 02:22:35 2011] Detection parameters:
  Position = (382.3, 345.8) = 17 48 38.56 -27 20 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.2 +/- 9.0
  Background counts = 10.2
  Rate = 0.009 +/- 0.002

[Fri Dec 23 02:22:35 2011] Off-axis axis estimate = 6.98'
[Fri Dec 23 03:44:55 2011] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 03:44:55 2011] Initial guess for spatial extent in simple fitting = 9.92"
[Fri Dec 23 03:44:55 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Fri Dec 23 03:44:55 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 9.92"
[Fri Dec 23 05:54:50 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_src5.ximg exists
[Fri Dec 23 05:54:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_src5.csv
[Fri Dec 23 05:54:50 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Dec 23 05:54:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_src5.csv
[Fri Dec 23 05:54:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 05:54:51 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Dec 23 05:54:51 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Dec 23 05:54:51 2011] Fit fullrun_mos1_xmm0511010301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Dec 23 06:40:29 2011] Spatial fit model total counts = 138.816000, observed total counts = 139.000000
[Fri Dec 23 06:40:29 2011] Offset between fit and detection position for source 22 = 1.474159 pixels
[Fri Dec 23 06:40:29 2011] 139.177900 total counts/ 90.794200 bgd. counts: snr = 5.077735
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.474159 pixels
  Position = (380.8, 346.1) = 17 48 39.03 -27 20 22.8
  Extent = 9.1 (5.5-12.5)", rotation angle = 0
  Source counts = 48.4 +/- 11.8
  Background counts = 90.8
  Rate = 0.006 +/- 0.001
[Fri Dec 23 06:40:29 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 06:40:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 06:40:29 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 06:40:29 2011] Source does appear to be extended
[Fri Dec 23 06:40:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 07:48:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 07:48:09 2011] Initial guess for spatial extent in simple fitting = 9.11"
[Fri Dec 23 07:48:09 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.928
[Fri Dec 23 07:48:09 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 9.11"
[Fri Dec 23 09:53:14 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_src4.ximg exists
[Fri Dec 23 09:53:14 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Dec 23 09:53:14 2011] Fit fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Dec 23 09:53:14 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Dec 23 09:53:14 2011] fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Dec 23 09:53:14 2011] Fit fullrun_mos1_xmm0511010301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Dec 23 10:56:53 2011] Spatial fit model total counts = 138.080000, observed total counts = 138.000000
[Fri Dec 23 10:56:53 2011] Offset between fit and detection position for source 22 = 0.649679 pixels
[Fri Dec 23 10:56:53 2011] 139.146600 total counts/ 87.181600 bgd. counts: snr = 5.565427
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.649679 pixels
  Position = (380.2, 346.1) = 17 48 39.25 -27 20 23.0
  Extent = 15.7 (11.8-18.2)", rotation angle = 359 (356-3) degrees
  Source counts = 52.0 +/- 11.8
  Background counts = 87.2
  Rate = 0.006 +/- 0.001
[Fri Dec 23 10:56:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 10:56:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 10:56:53 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 10:56:53 2011] Source does appear to be extended
[Fri Dec 23 10:56:53 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.81
[Fri Dec 23 10:56:53 2011] Source is asymmetric
[Fri Dec 23 12:29:31 2011] XMMSAS src. selection expression = ellipse(33026.386200, 30058.760600, 941.514027, 136.675804, 359.049951, X, Y)
[Fri Dec 23 12:29:31 2011] Writing source region out to fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src22_src.reg
[Fri Dec 23 12:29:31 2011] Extracting stamp from image fullrun_mos1_xmm0511010301_pi300-10000_cl_sm2.00.img.gz, (326, 292) - (434, 400)
[Fri Dec 23 12:29:31 2011] XMMSAS bgd. selection expression = annulus(33026.386200, 30058.760600, 1569.190045, 3138.380090, X, Y) && !ellipse(30425.022000, 30253.457600, 1431.128041, 1431.128041, 0.000000, X, Y) && !ellipse(36381.242000, 32504.482000, 263.820808, 263.820808, 0.000000, X, Y) && !ellipse(33623.571869, 32267.924530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34993.848419, 26402.691345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36870.008942, 32587.831665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35827.747986, 30330.847015, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 23 12:29:31 2011] Writing fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src22.gif
[Fri Dec 23 12:30:54 2011] Mean detx,y = (-5523.34, -8475.98) 
[Fri Dec 23 12:30:59 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 12:31:24 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 12:31:25 2011] Setting source spectrum file to fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Dec 23 12:31:25 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Dec 23 12:43:00 2011] Not generating rmf since there are only 51 counts
[Fri Dec 23 12:43:00 2011] rmf not generated due to insufficient counts
[Fri Dec 23 13:35:45 2011] Updating aperture counts using extracted products
[Fri Dec 23 13:35:45 2011] Error reading totcts from fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Dec 23 13:35:47 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 13:35:47 2011] Using photon index=1.80, rate=0.00606, arf fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src22.arf
[Fri Dec 23 13:35:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 13:35:47 2011] Updating source flux to 1.4e-13
[Fri Dec 23 13:35:50 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Dec 23 13:36:37 2011] xmm0511010301/analysis//spectral/fullrun_mos1_xmm0511010301_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete