[Sun Dec 18 21:22:01 2011] Detection parameters:
  Position = (340.2, 290.9) = 13 23 54.80 -61 59 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.7 +/- 27.3
  Background counts = 311.4
  Rate = 0.02 +/- 0.003

[Sun Dec 18 21:22:01 2011] Off-axis axis estimate = 3.08'
[Sun Dec 18 21:26:40 2011] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 21:26:40 2011] Initial guess for spatial extent in simple fitting = 7.97"
[Sun Dec 18 21:26:40 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.920
[Sun Dec 18 21:26:40 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 7.97"
[Sun Dec 18 22:05:57 2011] fullrun_pn_xmm0511010201_pi300-10000_cl_pass0_src12.ximg exists
[Sun Dec 18 22:05:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010201_pi300-10000_cl_pass0_src12.csv
[Sun Dec 18 22:05:57 2011] fullrun_pn_xmm0511010201_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Dec 18 22:05:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010201_pi300-10000_cl_pass0_src12.csv
[Sun Dec 18 22:05:57 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 22:05:57 2011] fullrun_pn_xmm0511010201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Dec 18 22:05:57 2011] fullrun_pn_xmm0511010201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Dec 18 22:05:57 2011] Fit fullrun_pn_xmm0511010201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Dec 18 22:22:19 2011] Spatial fit model total counts = 2110.000000, observed total counts = 2100.000000
[Sun Dec 18 22:22:19 2011] Offset between fit and detection position for source 12 = 3.922348 pixels
[Sun Dec 18 22:22:19 2011] 2244.662000 total counts/ 1697.690000 bgd. counts: snr = 13.275042
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 3.922348 pixels
  Position = (338.6, 287.3) = 13 23 55.81 -62 0 5.7
  Extent = 15.9 (15.9-15.9)", rotation angle = 0
  Source counts = 547.0 +/- 47.4
  Background counts = 1697.7
  Rate = 0.2 +/- 0.02
[Sun Dec 18 22:22:19 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 22:22:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 22:22:19 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 22:22:19 2011] Source does appear to be extended
[Sun Dec 18 22:22:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 22:22:19 2011] Source is confused with source 13
[Sun Dec 18 22:22:19 2011] Source is confused with source 16
[Sun Dec 18 22:22:19 2011] Source is confused with source 17
[Sun Dec 18 22:22:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 22:22:29 2011] Initial guess for spatial extent in simple fitting = 15.91"
[Sun Dec 18 22:22:29 2011] source mask rpix=3.7, npix_max = 69, mask sum = 60, frac = 0.868
[Sun Dec 18 22:22:29 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 15.91"
[Mon Dec 19 00:36:25 2011] fullrun_pn_xmm0511010201_pi300-10000_cl_pass1_src12.ximg exists
[Mon Dec 19 00:36:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010201_pi300-10000_cl_pass1_src12.csv
[Mon Dec 19 00:36:25 2011] fullrun_pn_xmm0511010201_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Dec 19 00:36:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511010201_pi300-10000_cl_pass1_src12.csv
[Mon Dec 19 00:36:25 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511010201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511010201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 00:36:25 2011] fullrun_pn_xmm0511010201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Dec 19 00:36:25 2011] fullrun_pn_xmm0511010201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Dec 19 00:36:26 2011] Fit fullrun_pn_xmm0511010201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Dec 19 00:52:10 2011] Warning, spatial fit 12 centroid is now closest to src. 13
[Mon Dec 19 00:52:10 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 00:52:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 00:52:10 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 00:52:10 2011] Source does appear to be extended
[Mon Dec 19 00:52:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 00:52:18 2011] XMMSAS src. selection expression = ellipse(29406.220800, 24950.290000, 954.414027, 954.414027, 0.000000, X, Y)
[Mon Dec 19 00:52:18 2011] Writing source region out to fullrun_pn_xmm0511010201_pi300-10000_pass1_cl_src12_src.reg
[Mon Dec 19 00:52:18 2011] Extracting stamp from image fullrun_pn_xmm0511010201_pi300-10000_cl_sm2.00.img.gz, (284, 232) - (393, 342)
[Mon Dec 19 00:52:18 2011] XMMSAS bgd. selection expression = annulus(29406.220800, 24950.290000, 1590.690046, 3181.380092, X, Y) && !ellipse(31983.604000, 26333.942400, 1420.088041, 1420.088041, 0.000000, X, Y) && !ellipse(27575.436000, 25469.164000, 1184.696034, 1184.696034, 0.000000, X, Y) && !ellipse(28211.172516, 25689.762878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27630.870000, 25417.168000, 1184.696034, 1184.696034, 0.000000, X, Y) && !ellipse(33403.864124, 25179.426447, 1148.880033, 688.083678, -0.000000, X, Y) && !ellipse(32053.188416, 25297.684082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30038.300000, 25094.274200, 2545.104073, 2545.104073, 0.000000, X, Y) && !ellipse(28377.532000, 25019.238000, 2318.584067, 2318.584067, 0.000000, X, Y) && !ellipse(28098.496000, 24287.706200, 1205.464035, 1205.464035, 0.000000, X, Y) && !ellipse(28878.992035, 24662.590454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29704.490000, 24570.851800, 1184.696034, 868.496025, 344.445000, X, Y)
[Mon Dec 19 00:52:18 2011] Writing fullrun_pn_xmm0511010201_pi300-10000_pass1_cl_src12.gif
[Mon Dec 19 01:00:26 2011] Mean detx,y = (-4373.66, -113.15) 
[Mon Dec 19 01:00:28 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 01:00:48 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 01:00:48 2011] Setting source spectrum file to fullrun_pn_xmm0511010201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Dec 19 01:00:48 2011] Setting bgd. spectrum file to fullrun_pn_xmm0511010201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Dec 19 02:44:59 2011] Updating aperture counts using extracted products
[Mon Dec 19 02:44:59 2011] Error reading totcts from fullrun_pn_xmm0511010201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Dec 19 02:45:00 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 02:45:00 2011] Using photon index=1.80, rate=0.198, arf fullrun_pn_xmm0511010201_pi300-10000_pass1_cl_src12.arf
[Mon Dec 19 02:45:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 02:45:00 2011] Updating source flux to 6.2e-13
[Mon Dec 19 02:45:58 2011] Flag c found in src. 12 procflags, skipping spectral fitting
[Mon Dec 19 02:52:54 2011] Reading fit data from xmm0511010201/analysis//spectral/fullrun_pn_xmm0511010201_pi300-10000_pass1_cl_src12_pl.csv
[Mon Dec 19 02:52:54 2011] Spectral fit parameter nH value = 1.61064e+13
[Mon Dec 19 02:52:54 2011] Spectral fit parameter PhoIndex value = 0.365839
[Mon Dec 19 02:52:54 2011] Failed to get F(0.3-8.0) from xmm0511010201/analysis//spectral/fullrun_pn_xmm0511010201_pi300-10000_pass1_cl_src12_pl.csv, possibly due to different flux energy range selected
[Mon Dec 19 02:52:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 02:52:54 2011] Using Nh = 1.6e+13, photon index=0.37, rate=0.198, arf fullrun_pn_xmm0511010201_pi300-10000_pass1_cl_src12.arf
[Mon Dec 19 02:52:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 02:52:54 2011] Updating source flux to 1.6e-12